When laying wall tiles in the bathroom, is it laid from the bottom to the top or from the top to the

Updated on Bathroom 2024-04-26
2 answers
  1. Anonymous users2024-01-23

    Spread from the bottom up.

    bai stick, a wall can not be pasted to the top at one time

    The seam is generally 1 3 mm DAO; Second, before paving, it is necessary to deal with the smoothness of the wall and deal with cracks; Third, the adhesive material should be applied slightly higher than the middle and all around, and the surface should be tapped with a rubber hammer to fix it, so as to avoid air accumulation in the adhesive layer. At the same time, a level test should be carried out; Fourth, the bonding material should be selected and appropriate, the ratio of cement to sand on the wall is 1:4, and the ratio of cement to sand on the ground is 1:3

  2. Anonymous users2024-01-22

    From the bottom up... Spread directly to the bottom. Then the floor tiles are directly against the wall tiles, which is beautiful and practical.

Related questions
The bathroom wall tiles are pasted from the bottom to the top, why is the door not on the horizontal
3 answers2024-04-26

This is not standardized, I will send you the specification of the wall tiles: determine the layout of the wall tiles, arranged horizontally and vertically on the same wall, and the non-whole bricks should be arranged in the secondary parts or in the dark corners. The width and height of the wall tiles below 10 cm can not be on the wall, the wall tiles should be divided in half, that is, on both sides of the wall at the same time to leave non-whole bricks to maintain the appearance. >>>More

What is the reason why the bathroom water will go from the bottom to the top from the reverse side o
4 answers2024-04-26

The floor drain water is not smooth, resulting in serious water accumulation on the surface layer, because the floor has been waterproofed, the water can not seep down, and the wall brick structure is not compact, and the water has the function of adsorption, and the water will rise slowly, resulting in the current phenomenon.

What to do if water seeps from the bottom up on the wall between the bathroom and the bedroom
6 answers2024-04-26

Possibility 1: Leaking water pipes buried in the wall.

Possibility 2: The waterproofing of the wall and the ground is not done. >>>More

The reason for the leakage of water from the bottom to the top of the bathroom floor tile joint
4 answers2024-04-26

The reason for the seepage of water from the bottom to the top of the bathroom floor tile joint may be that the water on the wall seeps to the ground, but the ground is waterproof, and the water cannot seep down.

When decorating the bathroom, the tile paving is the wall pressing the floor or the ground pressing
3 answers2024-04-26

Advantages of ground pressure walls:

Generally speaking, the ground pressure wall is the wall tiles from the bottom to the top, so that the tiles are not easy to produce hollowing, and the overall appearance will be more beautiful. >>>More