-
Anonymous users2024-01-23Instead of asking here, it is better to go directly to the instruction manual of this toilet, and there should be a detailed description of how to adjust this warm water on the instructions for use, or you can consult the after-sales service provider.
-
Anonymous users2024-01-22This smart toilet should have a setting button next to it, and you can uh set a temperature. Let's try it out again.
-
Anonymous users2024-01-21In the case of an automatic toilet, the water temperature should be turned up.
First, there is a button switch on the switch panel for adjusting the amount of water and water temperature in high and low gears, and you can choose to put it on the high grade. >>>More
Most homes do not have outlets reserved for smart toilets. If you have a water heater, you can lead the toilet cord to the roof and connect it to the water heater's socket. But be sure to ensure the safety of the grounding. >>>More
If so, there are two reasons for this.
First, if the flange is not installed, or the position of the flange is incorrect, it will cause outward flow. >>>More
If the floor is too high and the water pressure is insufficient, the most convenient way is to install a booster pump, which should be available at the brand water heater sales point, ask them to help install it. Water heaters (especially the current gas water heaters) need water pressure to control part of the safety valve, and the pressure will be lost a little, so the water heater will be smaller. After the installation of the booster pump, the pressure can generally be restored, and the water will be normal. >>>More
The water in the smart toilet will be connected to a water pipe from the angle valve, not necessarily from the tank.