-
Anonymous users2024-01-23The kitchen and bathroom are commonly used in the home, and there are more water sources, so be sure to take waterproof measures. After the renovation of the bathroom is completed, all the drains of the bathroom are blocked, and a 25 cm high "barrier" is built at the door, and then 20 cm high water is poured into the bathroom. After 24 hours, you will check whether there is leakage on the surrounding walls and floors, this 24-hour waterproof experiment is the key to ensure the quality of the waterproof project in the bathroom, you must do it.
-
Anonymous users2024-01-221. Whether to remove the kitchen and bathroom tiles to be re-waterproofed.
After smashing the bricks, it must be re-waterproofed. Among them, the wall of the bathroom is waterproof: the waterproof height of the shower area is not less than 1 meter, the water basin area is not less than 1 meter, the height of the toilet area is not less than 60 cm, and the height of the waterproof layer of other wall areas is not less than 20 cm; It is recommended to waterproof the wall of the kitchen from the floor to the wall 30 cm.
The floor of the kitchen and bathroom should be waterproofed, and then tiled or stoned.
2. Generally speaking, bricklayers can operate waterproof construction, and the problems and requirements of waterproof construction are shown in Article 1.
3. Construction sequence: remove the original wall and floor tiles and redesign and construction of the waterway and circuit of the kitchen and bathroom (referring to the situation that the original water circuit cannot meet the subsequent use requirements and need to readjust the layout of the water circuit) Do the waterproofing of the kitchen and bathroom Do a closed water test to check whether the waterproof is qualified After the waterproofing is qualified, start to pave the wall and floor tiles of the kitchen and bathroom.
4. Is it okay to do waterproof only for the ground? No. The waterproof height of the wall can be described in clause 1 for details.
There are a few cases that separate from you:
First: Have you tested the waters? Do you have to test the waterproofing of your bathroom for 24 hours or 48 hours before letting the downstairs determine if it is leaking? Generally, it will be at least 24 hours after the water test to reflect whether there is a water leak, and some small leaks will take a certain amount of time. >>>More
Generally, the kitchen wall is waterproof by 30 cm, and the position with a basin should be higher. The bathroom shower space should not be less than a meter, and the position of the basin also needs to be raised, and the other walls should be 30 cm. Of course, the more waterproof the wall, the better!
The remedy may not be easy. Only disassemble and re-do waterproofing, dismantle the threshold stone, make a platform to do a good job of waterproofing, and then install the threshold stone, otherwise the water in the bathroom will be soaked in other rooms, if your other rooms are wooden floors, it will be a big loss.
How is your progress now, I am specialized in decoration and maintenance, this depends on your luck, you don't look at these water, it may be a big hidden danger, I have encountered this problem, but the water downstairs is a little seepage, I dug the bathroom and repaired it can not receive the final payment, and I also tried the developer's waterproof is qualified. >>>More
In fact, as long as the cement is laid tightly, it will generally be fine, but the main thing is that all kinds of pipes are easy to cause water leakage, your first problem, as long as the ground part is not against the corner of the wall, there will generally be no problem. The second problem, if the drain of your floor drain is inserted in the original sewer pipe, there is no problem, but if it is suspended, there is a possibility of water leakage, you can remove the floor drain, brush the pipe and the vacated pit with water without leaking several times, and then glue the floor drain in place with glass glue. There is generally no problem.