-
Anonymous users2024-01-23The more standardized approach should be to use the expansion screw rod to make the suspension bar, and then the light steel keel main bone, auxiliary bone, and surface gypsum board. There will be no problem with such a construction process.
-
Anonymous users2024-01-22The top of the gypsum board is fixed with a thin wire, and the edge is fixed with glue, so you can use an expansion hook.
-
Anonymous users2024-01-21Yes. It will be degummed for a long time, and it will be fixed as much as possible.
The amount of work is about 30-50 per square meter, and for home use, you know, it is about 80-100 per square meter. >>>More
Due to the limitation of the height of the floor, the ceiling of the living room is generally only hung around, and the middle is not suspended. The bottom width of this kind of ceiling is generally about 40 cm, depending on the area of your living room. If the area is relatively large, it can also be appropriately relaxed, and vice versa; On the side is a light trough, which is done as shown in the picture. >>>More
Generally, He Cha will do gypsum board ceilings or finger and aluminum gusset ceilings, these two materials are relatively stable and strong, and there are more Zen teasing styles for modeling, and the effect will be relatively better!
The price varies from place to place, about 100-200 yuan, so it is recommended that you go to the physical store and ask for it.
1. PVC ceilingPVC ceiling is made of polyvinyl chloride as raw material, extruded and assembled into a frame and then made of glass. It has the characteristics of light, wear-resistant, age-resistant, good heat and sound insulation, heat and moisture-proof, insect-proof and fireproof. It is mainly suitable for kitchens and bathrooms. >>>More