-
Anonymous users2024-01-23That's the one inside the pad is broken, you have to replace the middle one, you can buy one online, but pay attention to the size.
-
Anonymous users2024-01-22There seems to be a switch next to the toilet that can be controlled.
This is because the plug has not been reset after the last flush, you just need to press the flush button again and hear a popping sound in the tank to reset the plug. In the future, when flushing, the hand should be released in time, and the plug can be reset with the water flow, please adopt.
It must be smart and broken, it needs to be repaired, it is recommended to go to the merchant for repair.
The internal parts of the toilet are divided into two parts Look at the problem of that part One part is the water inlet part Rely on the float valve to control the water intake, if the float is broken Replace this part Part is the water filling switch After pressing it, he will reset, the water will not flow, if you do not avoid water, you need to replace this part Or wipe the sealing ring clean and try, the quality of the replaced parts should be better, otherwise it will not take long.
If you have strong hands-on ability and time, remove them all, disassemble them, remove the scale inside, and then put them back on. >>>More
What to do if the toilet is blocked; Toilet blockage is generally a blockage at the toilet trap, and the best and easiest way is... >>>More