The floor tile joints in the bathroom are relatively small, can you use beauty joints to fill the jo

It is best to wet the ground with water and then mop it with a small amount of white cement. Then wipe it off with a rag piece by piece.

The sewing agent has to be sewn about 5mm to look good, too small to make it ineffective, and the labor cost of doing sewing is not cheap.

Absolutely.

The sewing agent is suitable for filling gaps above 2mm; The construction is more convenient, generally a quick-drying type, the surface is completely cured within two hours after the construction is completed, and the construction surface can be used normally within 24 hours.

This depends on the size of the gap.

There are requirements for the construction gap of the beauty sewing agent, and the construction gap is generally recommended to be about 5 mm, but at least it cannot be less than 3 mm, and the gap less than 3 mm cannot be constructed.

What you said is relatively small, how many millimeters of gap, you can measure and compare, whether it can be constructed.

Meiding porcelain glue is mainly used for gap filling, corners, edge closing, sewing and other home decoration.

After curing, the texture is like ceramic, with strong viscosity and high hardness.

Resistant to most molds, long-lasting stain resistance, water resistance, scrub resistance, etc.

You can clean it up with a special sewing agent for beauty sewing agent.

OK. Look at whether the handiwork is good.

Of course, you can, like the kind of beauty sewing agent that is filled with beautiful crystals, you don't need to caulk.