-
Anonymous users2024-01-231. Before the installation of the elastic line, determine the position of the ceiling installation, measure and design the elevation with a long ruler according to the floor elevation level, and then use the ink line to pop up the position of the main keel on the roof.
2. After installing the boom when the elevation level line is played, the elevation of the lower head of the boom is determined, and one end of the boom without bolts is fixed under the roof with a bolt according to the position of the main keel, and the boom is reinforced with 6m steel bars.
3. Install the main keel to see the installation of the main keel, before installing the main keel, you should first match the boom nut, and then insert the main keel of the assembled pendant into the corresponding boom bolt, tighten the nut, and connect the main keel.
4. After installing the secondary keel, the secondary keel can be placed according to the position line of the secondary keel that has popped out. According to the original design, fix the spacing of the main keel, and fix the hanging piece of the secondary keel on the main keel.
5. Most of the specifications of the aluminum strips on the side of the installation are 25mm*25mm, and the aluminum strips should be fixed with cement nails around the wall during installation.
6. The installation and installation of the aluminum gusset can not be dismantled savagely, and it should be pressed down in order along the flanging part, and then pushed tightly, and the specifications of the aluminum gusset should also be purchased in accordance with the design requirements.
7. The installation of lamps and vents is finally carried out for the installation of lamps and vents, which can refer to the designed ceiling plan and the position of the holes left when installing the aluminum buckle plate, and ensure the safety of the wires and facilitate future maintenance when pulling the wire. What are the brands of suspended ceilings. In fact, there are many ceiling brands that have not been introduced completely, and it is recommended that people who need to do ceilings should look at different ceiling brands to see that the brands of sleep production will be better.
How to install the ceiling. The installation of suspended ceilings requires professionals to complete, and the owner must find a reliable master.
-
Anonymous users2024-01-22How to make a ceiling standard? 10 construction standards to make yourself a ceiling expert!
1. Find the horizontal line before the ceiling and stake out the ceiling in advance.
2. The ceiling should be made of light steel keel ceiling as much as possible, with the main keel spacing of the ceiling being 800mm and the auxiliary keel being 300mm
3. In case of arc-shaped ceiling or heterosexual ceiling, wooden keel can be used, and the wooden keel must be painted with fireproof coating before use.
4. The ceiling sealing gypsum board money needs to be reinforced with woodworking board at the position of the main lamp, which is convenient for installation grade, and the large ceiling needs to be installed with embedded parts in advance.
5. The gypsum board must be fixed with self-tapping screws, the screws must not protrude from the surface, and the surface of the gypsum board is not damaged.
6. The curtain box must be made with base woodworking board and gypsum board finish.
7. The corner of the gypsum board ceiling must be primed with a nine-centimeter board, and the cover gypsum board must be made of L-shaped board to prevent cracking.
8. Bathrooms and kitchens with gypsum board ceilings must be waterproof gypsum board.
<>1. Clear location: compare the design drawing with the actual Lingqiaoji installation, and determine the specific location of the electrical appliances and keel to determine the height of the ceiling installation. 2. Ensure the level: >>>More
Wooden keel ceiling:
Keel brush fireproof coating twice, keel tenon, fixed with iron nails, each joint with two iron nails fixed, made into a 300 * 300 or 400 * 400 frame, installed on the top, (it is forbidden to use a rigid row of nails, nails to fix the frame), adjust the height, straight, after acceptance of the gypsum board, the use of self-tapping fixation, self-tapping density: 20cm, the edge part should be denser. >>>More
If you don't have experience, it's best not to install it yourself. The installation of the integrated ceiling must at least have a certain amount of experience, because it is necessary to go through a series of processes such as trimming and attaching the edge line, drilling and topping, installing the main keel, installing the auxiliary keel, installing the ceiling, wiring and installing electrical appliances, if there are some mistakes (such as not understanding the distribution of water and electricity, it is possible to penetrate the water pipes of the people upstairs, or the edge line is uneven, or the keel is uneven), it will directly affect the appearance of the ceiling, which is one of them, if the secondary reinstallation is caused by these problems, it will outweigh the losses. >>>More
If there is a suspended ceiling, a ceiling-type sprinkler is used to be located under the ceiling; If there is no suspended ceiling, the splash tray is under the bottom of the roof sheet, depending on the horizontal distance from the beam. A row of sprinklers must be added to the > combustible ceiling, which is generally sprayed up and down. For details, please refer to the "Code for the Design of Automatic Sprinkler Systems", which has 3 relevant provisions and 1 table.
Properly handle the installation of balcony ceilings and balcony drying racks, and install drying racks before hanging ceilings. >>>More