A plug in the bathroom socket and the whole house was out of power

The inspection method is as follows: each socket is plugged in with electrical appliances to try, if the landlord determines that only these two sockets are plugged in and tripped, one possibility is that the two sockets to the distribution box branch switch of the line leakage (the line is damaged, the live wire and the grounding wire are in contact with each other), the second possibility is that the zero ground is reversed, and the electrician who originally helped you arrange the wire at home came to the door to eliminate the leakage fault. >>>More

Good! This is similar to the principle of the switch, that "plugged in" will turn on the power of the bulb, so that the red bulb will also light up.

1. If there is leakage of solar energy, 2 The power of the heater exceeds the setting value of the air switch. 3. The plug change and the ground are reversed.

It can be, but it's best not to pretend as much as possible, if you do it again, one is troublesome, and the other is rash to do it, which is easy to lead to potential safety hazards.

The bathroom shower socket is generally installed on the same wall as the hot and cold water outlet, and the shower should be transferred to the right 90 degrees (the direction in the picture is turned to the right) when the shower is arranged, so as not to spray directly on the human body when the water is discharged, and then transferred to the human body after adjusting the water temperature is appropriate and stable.