The toilet at home will not stop pumping, and it will not stop when it is full, because my water lev

Updated on Toilet 2024-04-23
1 answers
  1. Anonymous users2024-01-23

    Press the float first, press it and twist it counterclockwise if you can't hear the sound of the water, and press it to change the toilet to the water for more than ten yuan.

Related questions
2 answers2024-04-23

Let's clean the toilet.

Go to the supermarket and check it out, a lot. >>>More

6 answers2024-04-23

If it's toilet paper, just poke it a few times with a toilet bowl! >>>More

2 answers2024-04-23

The principle of the flush toilet is mainly the siphon principle, and the schematic diagram of the flush toilet is also based on the siphon principle. The "pumping" of the flush toilet refers to the S-shaped bend under the toilet, and when the water surface in the toilet exceeds the high point of the S-bend, the siphon phenomenon is formed, which can pump the water and dirt of the toilet together. Until only a small amount of water remains, the siphon destroys, leaving a small amount of water, forming a water seal. >>>More

2 answers2024-04-23

1. It's not the problem of the blue float, it's the rubber plug under the button. The key is not on the plastic parts stuck, so the rubber plug can not go down, can not block the water outlet, how much water comes in has flowed out, the water can not hold, the float naturally can not come up. >>>More

4 answers2024-04-23

I believe everyone has encountered a blocked toilet, and it can also be said to be a more common thing in lifeNot only does it directly affect normal life, but it puts us in an awkward position? In fact, after the toilet is blocked, you may not immediately turn to a professional toilet company, you can try it yourself, so what are the methods of flushing the toilet? >>>More