What measures should be done for the drain pipes of the washbasin, toilet, and sink

Updated on Toilet 2024-04-15
2 answers
  1. Anonymous users2024-01-23

    Generally, the toilet will do an anti-odor bend, and the basin and sink will generally be made to filter out debris sewer facilities, which are finished products in the building materials market and can be bought directly.

  2. Anonymous users2024-01-22

    Try not to flush debris into the sewer pipe during use, otherwise it will cause the pipe to be blocked and affect the use, thank you.

Related questions
3 answers2024-04-15

No, these tubes are resistant to high temperatures, and if they leak, you may have purchased a counterfeit product. Do you try to drain the water to see if it leaks? Don't zoom in too much, just try slowly.

2 answers2024-04-15

In response to this problem, as long as there is no water leakage or aging, it has no effect on the body.

1 answers2024-04-15

Yes, but the drainage may be slower. There is also a large water outlet of the toilet, so you have to buy large and small shrinkage joints to install the toilet.

8 answers2024-04-15

The toilet reserves the distance between the sewer and the wall, and the toilet selection tool can be 30 cm to 40 cm according to the room type of the toilet and personal preferences, which is relatively normal, and the strong one who can reserve 20 cm in actual operation, and the actual distance from the center line of the sewer, the actual distance of the bridge deck can be 32 cm to 42 cm, and there will actually be an error of 10 cm, which is very normal.

2 answers2024-04-15

No, the bathroom only reserves a 70mm water pipe, whether it is a water pipe or a sewer pipe, because the 70mm thick pipe should be a sewer pipe, it can be connected with the toilet sewer pipe, then there must be a water pipe, otherwise what to use to flush the toilet.