In my bungalow, I want to install a toilet at home, and the toilet sewer pipe is 60 meters to the ne

Updated on Toilet 2024-04-07
3 answers
  1. Anonymous users2024-01-23

    The indoor part is 100 PVC-U, and the outdoor part is recommended to use ribbed bellows 200 considering other factors.

  2. Anonymous users2024-01-22

    100 pipes should have a slope of at least 50 cm.

  3. Anonymous users2024-01-21

    It is forbidden to pollute the environment by discharging sewage into the river!

Related questions
2 answers2024-04-07

The tee is completely sufficient, after all, the toilet is not always used, and there is no need to reinstall the pipeline in your free time. But be sure to set up a separate valve and you're good to go!

2 answers2024-04-07

Yes, but it must be cleaned or sanded with sandpaper. The pieces should be as suitable and large as possible.

3 answers2024-04-07

You're better off using a single hole. The double hole is still a bit of a hassle.

4 answers2024-04-07

The effect is the same, the two ports are just to be able to discharge to one more place. If it is a straight-flush toilet, it uses the large thrust formed by the compressed air, and the flushing speed is fast, the punch is large, and the sewage is strong, the speed is fast, and the water is used less, and there is no leakage. Because the direct flush type uses the instantaneous strong kinetic energy of the water flow, the sound of hitting the pipe wall is relatively loud. >>>More

2 answers2024-04-07

It's hard to say, check item by item, 1 If you can't see urine alkali inside and outside the toilet, the toilet is generally fine. 2. Can the floor drain in the bathroom be filled with water? If it can be filled, it means that the main pipe is blocked. If it can't be filled, it means that the toilet is clogged.