-
Anonymous users2024-01-23The estimation described by the landlord is the height of the water seal, the height of the water seal is fixed, and the only thing that can be changed is the water supply pipe on the water part in the toilet tank to adjust.
Generally, there is a small hose on the double-gear water piece, called the water replenishment hose, the water replenishment hose is placed directly in the water tank, the water seal height is low, if it is placed in the water replenishment hole, the water cover is relatively high. This is the easiest and most effective way to adjust. Different types of toilets, different manufacturers' designs, water seal heights are also different.
Hope to be able to help the landlord.
If the water leaks, find a special person to repair it, and it should be replaced ......
One button press once 6 liters of water.
For two buttons, press the big button for flushing the stool, and press 6 liters of water once; Flush urinate press the small button and press once 3 liters of water. >>>More
This is a problem with the quality of the siphon inside the toilet, which has nothing to do with the water pipe of the water tank.
The water output is controlled by the middle one, you can use the big key to try the water output first, and then try the small key, if the installation is reversed at that time you just turn the button on the lid off the head, please adopt it.
The old toilet tank does not come out of the water is not the fault of the float, the float only plays the function of controlling the water inlet of the water tank and terminating the water intake, you said that the water does not come out when you press the button, and the water comes out only when you pick up the cover, which is the reason why the connection cable between the button and the drain of the toilet tank has some length. >>>More