To decorate the bathroom to do dry and wet separation, is it appropriate to place the toilet in the

1. The dry area is designed outside the bathroom.

Dry area design is a completely separated design scheme outside the bathroom, this practice is usually to put the bathing area and the toilet all in the bathroom, the outside is used as a washbasin, and the middle is directly separated by a door, this scheme is the most thorough and effective, the separate handwashing station area avoids the conflict between the toilet and washing, for the family with more residents, it is very practical, in addition, this design is also very suitable for small apartment types, many owners will think that their bathroom area is too small, there is no way to achieve dry and wet separation, By placing the sink outside the bathroom, you can easily achieve the effect of separating wet and dry.

2. Semi-open separation.

Semi-open dry and wet separation refers to the use of glass or some brick walls to separate the sink, so as to achieve the effect of dry and wet separation, this separation method has achieved a clear division visually, although the dry and wet areas are still in the same space, but the two are completely independent, the effect of this scheme is very good.

3. Shower room.

Bathroom dry and wet separation shower room decoration is also a good program, shower room is a more popular way of bathroom decoration in recent years, owners can customize the size and shape of the shower room according to their own living needs and bathroom structure, the shower room can effectively prevent water vapor diffusion, is a better scheme design in the bathroom dry and wet separation.

4. Use the shower curtain for separation.

In order to reduce the budget, but also to achieve the effect of dry and wet separation, many families will choose to use the shower curtain for dry and wet separation, the installation of the shower curtain is simpler and faster, and at the same time can reduce the splashing of water droplets, and the style of the shower curtain, the style is diverse, the decorative effect is more prominent, so that the effect of the shower curtain blocking water vapor is not very obvious, if the economic conditions are better, it is not recommended to use this kind of amplification of dry and wet separation in the bathroom.

5. Use different ground materials.

The use of different floor materials for dry and wet separation is only to divide the dry and wet areas on the ground, and lay some more waterproof materials on the area where the bathroom is located, and choose materials with more comfortable feet at the washbasin, this method is usually used with the shower curtain, and the dry and wet separation is achieved visually, but the actual effect is not very good.

According to your simple description, it is explained below:

For the decoration of the bathroom to do dry and wet separation of the problem, this should be set according to the size of the large area of the bathroom and the layout of the bathroom sanitary equipment, if the bathroom area is larger, and then do the dry and wet separation when drunk is the toilet as a dry area, of course, if the bathroom area is small, or the structure of the bathroom is more complex, the toilet is best placed in the wet area.

If the dry area is sufficient, it is recommended that the toilet be placed in the dry area.

To decorate the bathroom to do dry and wet separation, is it appropriate to place the toilet in the dry area or in the wet area?

Dry area. There is less water in the dry area and it is not easy to slip, but if it is installed in the wet area for more privacy, it can be installed according to the needs. The traditional toilet is mainly divided into three areas, the toilet area, the sink area, and the shower area (not counting the laundry area) should consider the area allocation of these three areas when separating dry and wet.

Therefore, the bathroom must have at least enough area to do dry and wet separation, the width of the washbasin is about about about that, the length (related to the depth of the bathroom door) is also about this range, and the toilet area plus the washbasin area is about no more than 4. Coupled with some transition areas, then the whole bathroom must be at least 6 or more to do dry and wet separation. Precautions for decorating the bathroom, the most important thing for the separation of dry and wet in the bathroom is to put the foundation waterproof engineering mausoleum in place, so as to play the role of dry and wet separation.

When laying bathroom tiles, the foundation engineering of waterproof coating should be done, and the next step before renting can be carried out after passing the waterproof test, as for the choice of waterproof coating, it is best to choose a well-known paint brand, and the construction process can not be careless. The separation of functional areas is to divide the space according to the characteristics of the dry and wet area, and most of the moisture in the bathroom comes from the shower area, which will not only make the surrounding space more humid, but also affect the use of other areas, so it is necessary to separate an independent shower room. If the sanitary and clean room at home is relatively large, you can design an independent bathroom, and then design the sink outside the bathroom.