-
Anonymous users2024-01-231. The waterproofing of the bathroom generally needs to be brushed 2-3 times. 2. The specific methods are as follows: 1. The ground uses cement mortar to find a slope in the direction of the floor drain, but the surface should be flat.
The slope near the entrance is small, and the slope near the floor drain is large. 2. The pipeline passes through the root of the floor slab and near the floor drain to strengthen the waterproofing.
-
Anonymous users2024-01-22Hello, the waterproofing of the bathroom is very important, if the waterproofing is not done well, it will make the downstairs seepage and leakage, when the downstairs neighbors will come to you to make trouble, it is recommended to do two more layers of waterproofing and do waterproof protective layer to avoid the later construction of the waterproof damage, and after the waterproofing should also pay attention to do 48-72 hours of water storage experiment, in order to check whether the waterproof is done.
-
Anonymous users2024-01-211. The waterproofing of the bathroom generally needs to be brushed 2-3 times.
The bathroom is waterproof, and the surrounding walls need to be painted at a height of not less than 30 cm; If there is a shower, the height of the waterproof paint applied on the installation of the shower faucet and the adjacent wall should not be less than 150 cm, preferably about 180 cm. >>>More
The waterproofing manufacturing method:
The toilet space of ordinary residential buildings is narrow, and there are pipelines passing through the floor slab, so the coating is commonly used for waterproofing and the membrane is rarely used for waterproofing. >>>More
First, use a brown brush.
Second, waterproof coatings are special materials. >>>More
First do the water and electricity transformation in the bathroom, the tap water pipe pressure test "8-10 kg half an hour without leakage", and then do the waterproof treatment "closed water experiment at least 12 hours", and then you can pave the floor heating, and the floor heating is paved with a thermal insulation layer under the floor heating, which will not affect the waterproof coating.
Brush the height of 20cm with waterproof paint along the bathroom wall, up to 3 degrees, note: the floor of the bathroom should also be brushed on the ground is the place that is in contact with the most water, and it is also the hardest hit area that is most likely to cause water leakage. Bathroom waterproofing, is not a problem that can be solved by changing some floor tiles with better waterproof performance, the layer of cement mortar under the floor tiles is the key to waterproofing. >>>More