How to deal with the fogging of double layer tempered glass in the bathroom?

Updated on Bathroom 2024-04-09
3 answers
  1. Anonymous users2024-01-23

    The fogging of the double glazing is due to cracking of the sealant, but the water ingress is not only a problem of cracking, but also because the sink was not opened on the profile during installation, or the drain tank has been blocked. If the water level is already higher than the profile below, there is a chance that water will leak in from above (which is rare), and in any case the glass will need to be pulled apart and redone. It's okay to find someone to install it (if you spend your own money, you don't need to replace the whole piece of glass).

    Causes of fogging of double-glazed doors and windows:

    The air pressure balance hole and drainage hole are not opened or the water cannot be discharged due to unreasonable opening, and the water vapor evaporates for a long time and enters the glass interlayer to produce fog.

    The installation position of the spacer is not reasonable. The septum is pasted along the edge of the glass without leaving a certain gap, which is easy to cause the spacer to be in direct contact with rainwater, and after adsorption, water vapor is generated between the glass.

    The sealing of the glass is not tight, and the sealant on all sides is uneven, and there are leaks.

  2. Anonymous users2024-01-22

    Double-layer tempered insulating glass fogging, the best way to replace the glass treatment, because the middle of the double-layer glass also needs to be vacuumed, but also to press the adhesive strip, these are the work that cannot be completed on site.

  3. Anonymous users2024-01-21

    The double-layer tempered glass in the bathroom is fogged, indicating that water vapor has entered the middle, so what about this glass? It's already invalid, and it needs to be replaced.

Related questions
6 answers2024-04-09

1. The fogging of double-layer glass is the cracking of the sealant, but the water ingress is not only the problem of cracking, but also because the sink is not opened on the profile during installation, or the drain tank has been blocked. If the water level is already higher than the profile below, there is a chance that water will leak in from above (which is rare), and in any case the glass will need to be pulled apart and redone. It's okay to find someone to install it (if you spend your own money, you don't need to replace the whole piece of glass). >>>More

3 answers2024-04-09

The kitchen, bathroom, bedroom and other doors are very particular about the choice of materials. For example, the entrance door is basically a steel fire door or an anti-theft door, the bedroom door is a solid wood door, the bathroom is best made of PVC door, because there are moisture-proof requirements, and the kitchen door is based on a solid wood frame and a glass core, because there are oil-proof requirements. Of course, double-layer tempered glass is preferred. >>>More

1 answers2024-04-09

It is not suitable for tempered glass to be heavier, and it is not very light to use, and it is still better than ordinary glass, because of its light weight.

5 answers2024-04-09

Your fears are justified. The last process of installing sliding doors abroad is lubrication, and no one cares about it in China. Be sure to remember that the sliding door should be lubricated during installation and use. Otherwise, the resistance will be large, and it will become heavier and heavier, and there will be abnormal noises, poor movement, inability to pull and even wear out the slide. >>>More

2 answers2024-04-09

The mature solution is to glue a special heating plate behind the glass (mirror) to heat it up without condensing water mist. There is also a self-cleaning agent applied to the surface, this is not sure if it will be successful?