-
Anonymous users2024-01-231. Spring line positioning. The hollow ceiling elastic line mainly includes the elastic hollow ceiling elevation line and keel layout grid positioning. The elevation line can be marked with the water column method to mark the position of the hollow ceiling plane, and then the elevation line can be popped up according to the position; The positioning of the keel grid needs to be determined according to the size of the veneer and the arrangement of the keel grid.
IN ORDER TO FACILITATE THE INSTALLATION OF THE TWO KEELS, THE SPACING SIZE OF THE CENTERLINE IS GENERALLY ABOUT 2MM LARGER THAN THE SIZE OF THE VENEER. The layout of the keel grid should be as smooth as possible to ensure the uniformity and integrity of the keel grid to ensure that the hollow flower ceiling has a regular decorative effect. First, draw the hollow ceiling area on the paper according to the proportion, and then arrange the hollow ceiling keel on the paper according to the principle of keel arrangement.
Once you have decided on the location, draw the location on the wall.
2. Fix the boom. The hanging piece of the hollow ceiling, at present, the most used expansion screw or nail is used to fix the angle steel block, and the galvanized iron wire used for hanging the keel is tied firmly to the hanging piece through the hole on the angle steel block. The suspension can also be with a telescopic boom.
There are many types of telescopic booms, and the more common ones are No. 8 lead wire straightening, and the two lead wires are connected with a spring steel sheet with holes, and the adjustment and fixing are mainly based on the spring steel sheet.
3. Install the keel. The keel is generally divided into the main keel and the secondary keel. After the main keel is hoisted during installation, it is temporarily fixed at a position slightly higher than the elevation line, and if the hollow ceiling area is larger, it can be divided into several parts for hoisting.
Then a secondary keel is installed between the main keel, that is, the cross brace keel. The length of the cross brace keel interception should be measured using a die gauge. Die gauges should also be used to measure keel spacing during installation.
First, the installation method of ceiling spotlights:
1. First of all, turn off the power and slowly buckle the lamp, pay attention to the spring clip on the lamp, and press the finger to take the lamp down after seeing it, if you don't pay attention to the spring card, pulling the lamp head down will be hurt by the spring card, so be careful. >>>More
This is made of panels - first hang the flat roof, fix the wooden keel skeleton, and then seal the panels on both sides.
Hello, this process is simple to do, but tedious to say.
Take the suit door as an example: >>>More
Novice must read (collection) how to see the k-line chart, stock account opening process, stock beginners, how to see the market trading process, how to calculate the cost of stock trading, new shareholders enter the market, "full strategy, new entry into the stock market) to the road to the master, how to place an order, successfully grasp the investment opportunity, stock nouns, brand new shareholders must read: three major preparations for entering the market, novices enter the market! It is necessary to practice six skills first, 27 stock buying experience, stock trading entrustment procedures and entrustment methods, and stock trading time.
According to their own economic ability to decorate is the best, the home is not the more luxurious the better, should be a warm place, if you can find a warm feeling at home, look at your own living room is beautiful, of course, there must be the owner's own characteristics.