-
Anonymous users2024-01-23Generally speaking, the walls of the bathroom should be waterproof about 30cm thick to prevent stagnant water from penetrating the walls. If you use two screens, the two walls that are connected should also be painted. If a bathtub is used, the height of the waterproof coating on the wall adjacent to the bathtub is also higher than the upper edge of the bathtub.
After the wall is coated with waterproof paint, a waterproof test should also be carried out, all the sewers in the bathroom should be blocked, and a 25cm thick "threshold" should be built at the door, and then 20cm high water should be poured into the bathroom. After 24 hours, check the surrounding walls for leaks.
-
Anonymous users2024-01-22The waterproof height of the wall is generally 30CM; For non-load-bearing walls, the basic waterproof height should be at least 180CM; The waterproof height of the wall of the bathroom with a shower room should generally be 180CM; If there is a bathtub, the waterproof height of the wall adjacent to the bathtub should be 30CM higher than the bathtub.
THE WALL IN THE BATHROOM THAT IS IN CONTACT WITH THE WASHBASIN IS 300MM FROM THE GROUND TO THE WASHBASIN ABOVE; Pipes through the floor slab. THE WATERPROOF HEIGHT IS ABOUT 100MM ABOVE THE ROOT OF THE TUBE.
THE WATERPROOF HEIGHT OF THE BATHROOM FLOOR IS USUALLY USED OUTSIDE THE REINFORCED CONCRETE FLOOR PAVEMENT, 1:3 CEMENT SLURRY TO FIND THE SLOPE LAYER, AND THE THINNEST PART OF THE GROUND SHOULD BE 20MM THICK. 30MM THICK DRY HARD CEMENT MORTAR BONDING LAYER, SLOPE FLOOR DRAIN. Smoothing all at once.
The height of the waterproof decoration of the bathroom floor tiles, in addition to the waterproof layer, the use of cement mortar ground leveling, and the waterproof coating of the floor, the contact between the waterproof layer of the floor tiles and the wall should be enclosed upwards and about 25 30CM higher than the ground.
THE HEIGHT OF THE WATER LEAK SEAL OF THE TOILET SEWER SHOULD BE 50MM, THE FLOOR DRAIN OF THE SEWER SHOULD BE ABOUT 10MM LOWER THAN THE GROUND, AND THE HOLE DIAMETER OF THE FLOOR DRAIN SHOULD BE CONTROLLED BETWEEN 6 8MM.
Height is one thing, more important is whether the process and quality of the production are up to standard, to ensure the construction standard, to achieve the effect of waterproofing.
Height within one meter to the left and right around the shower. The rest is 300 high. However, for safety reasons, the entire wall is generally made meters high.
Bathroom waterproof height.
1. For home decoration toilets, the waterproof height required by the state is generally 180cm. Referring to the national standard, about 4 bathrooms can be constructed in this way, about 6 can be divided into dry and wet areas, showers can be 180cm high within 1 5m range, and the rest can be 50cm high, which can save money and achieve the goal. >>>More
The bathroom is waterproof to prevent water from seeping downstairs, and the next door to the bathroom is generally a room, and the wall may also seep water, so the wall should also be fully waterproof. How high does the bathroom need to be waterproof? >>>More
That's a lie to you, there is a shower adjacent to the wall is best the height of the whole wall is appropriate, after doing waterproof and drying, do brushing in the pasting surface bricks on it.