-
Anonymous users2024-01-23Before the plastic gusset was installed, the carpenter made the skeleton, and the skeleton was made of wooden strips.
If you feel that the strip is not deformed, you can attach the gusset plate and nail it to the strip with small nails. After nailing, along the perimeter of the wall, nail it with scrap material and seal it.
-
Anonymous users2024-01-22The plastic gusset in the bathroom fell off, and this installation method is very simple. There are buckles between the gusset and the gusset, and you push the buckle and go up.
It's simple, find a screwdriver and install it. If you don't have that much strength, you can find a boy to help. If you really can't do it, you have to find someone to change the lock. If you change the lock, you can come to the door to provide service, and a phone call is OK.
In general, the roof height of the bathroom is the same as that of other rooms, and the ceiling height can be designed between meters. .If you want to swap or clean, you can remove it with a suction cup or a special plate remover.
There is a kind of glue, the wall needs to be smooth, there are tiles or particle ash, take out your sticker and press it the wall, squeeze the air inside will not fall, you need to clean the wall with a rag before pasting. There is also a kind of self-adhesive, which is easy to fall off, because the adhesive of the glue is not high, and it is easily affected. If it falls off, you can add some super glue or 520 glue to the adhesive surface.
Research it, it's really not good, find a professional person to practice.
Hello! It's hard to judge like this, and you have to go to the scene to see it.