About the problem of water leakage in the bathroom

Updated on Bathroom 2024-04-23
4 answers
  1. Anonymous users2024-01-23

    This one is the most disturbing. Mine turned out to be a leak in the washbasin outside the bathroom, you see if there is any other place for water in the upstairs house except for the bathroom, stop using it for a while, if it doesn't leak, that's the reason.

  2. Anonymous users2024-01-22

    It may also be a problem with the drainage pipe, the pressure can only hit the water supply pipe, not the drainage pipe, we thought we had done such a thing, when we first started to do waterproofing, everything was tested, no problem. As a result, it leaked again after a while, and it turned out to be redone with tiles, and it was found that it was caused by a leak in the drainage pipe, and it was fine when it was repaired. If you can't test the water and suppress the drain pipe, ask the upstairs to check it carefully

  3. Anonymous users2024-01-21

    Do waterproofing needs to be done on the surface of the water, dig excellent permeability crystalline waterproofing, you can do it yourself on the cement surface with a super permeable waterproof guard (if there are cracks and potholes on the cement surface, fill the complete with metin porcelain glue and then do waterproofing).

    For the tile surface, first check whether the filling of the tile gap is complete (if the filling of the tile gap is incomplete, fill it with Meiding porcelain glue, and then use a stone tile waterproof guard to do waterproofing).

    Exterior wall paint can be made waterproof with transparent waterproof repair adhesive.

    The product will penetrate into the base layer and make the base layer waterproof. The product is recommended to be constructed in a dry place, the drier the base surface, the deeper the product can penetrate, if the base surface is full of moisture, high density, the material can not penetrate well. Regarding the principle of waterproof plugging, the source of water leakage is not blocked, and the water will only continue to penetrate into the wall, which will exist inside the wall for a long time, and will leak out from other parts of the wall when the water reaches a certain level.

    The problem cannot be solved, and only by spraying waterproofing agent on the outside of the roof or exterior wall so that the water cannot penetrate into the wall and flow away can the problem be completely solved.

  4. Anonymous users2024-01-20

    The top of the floor is fully waterproofed again.

Related questions
4 answers2024-04-23

In most cases, there is a leak in the bathroom on the fourth floor, and the waterproofing is not done. In a few cases, more than 5 layers are leaked. Find a property, or ask an insider to look for it layer by layer.

5 answers2024-04-23

You'd better control the opening, the smaller the better, if it's too big, it will affect the waterproof layer.

2 answers2024-04-23

The transformation should involve the treatment of waterproofing, first of all, we must consider how to do the waterproofing and drainage pipe guidance, which is the most basic, more transformation can be"Boyi.com"Let's find out, where I just saw it.

3 answers2024-04-23

1 In fact, you have such a layout, the bathroom is in the Kun, and the location between the phases, the problem is not big, and the ventilation problem needs to use a ventilation fan. >>>More

24 answers2024-04-23

Article 40 of the Regulations on the Quality Management of Construction Projects also stipulates that under normal use conditions, the minimum warranty period for construction projects is: five years for roof waterproofing projects, toilets with waterproof requirements, rooms and external walls. >>>More