-
Anonymous users2024-01-23I haven't repaired it, I've been very busy recently, I opened another one at home a while ago, and I saw it, it should be that the water inlet in the tank is broken, and it's good to change it, find a business.
Inquire about the price of the water inlet first, and then look at the price of the merchant's maintenance, if there is a gap, buy one yourself, if you can't install it, find a plumber, and you can get it in a while.
I disassembled it myself at home, it's not complicated! ~~
My house can get water, but it's slow.
At the end of the day, you will definitely be able to fill up Ai
The broken toilet in my house is close to the wall, and I can't use my hands to dismantle it, otherwise I'll get it done myself!
Hope it helps.
I wish your toilet a speedy recovery! ~~
Supplement: I just checked the price of the inlet valve on the Internet, and it ranges from 40 to 100 on Taobao!
-
Anonymous users2024-01-22You're a bit of a self-talker, how do you know that someone else's toilet is in the same situation as yours?
If you don't tell others the specific situation, how can you ask others to help you?
-
Anonymous users2024-01-21It is recommended that you brush it with a toilet washer.
Only use the shifter, or use the whole to raise the ground.
The easiest way to do this is to put a little dish soap in the toilet bowl and then a basin of hot water so that the blockage can be unblocked.
If there is a leak on the edge of the toilet, you need to clean the surrounding glue first, put the toilet at an angle, replace the broken rubber ring, and then install the toilet bowl and apply sealant. If the bottom of the toilet is a cement board, you need to clean the cement first, reapply it with black cement, and finally apply white cement to the outer layer. >>>More
(1) Check whether the tap water pressure is too low.
2) Check whether the filter screen of the inlet valve is blocked by debris. >>>More
1. Leaking water from the toilet lid is a common problem, so don't worry too much when this problem occurs. First of all, we can open the lid of the toilet bowl to see what position the horizontal line of the internal scoop is when the toilet bowl is full of water. If the inside of the lid is already full of water, but the water does not stop entering the lid, then the lid must be leaking. >>>More