-
Anonymous users2024-01-23Repair method of toilet floor leakage:
a.After determining that the ground is leaking, it is necessary to determine the location of the water leakage, and then you can go downstairs to check the leakage. Before maintenance, be sure to clean up the oil, water and dust on the ground, and keep the ground dry.
b.If caulk is used for maintenance, a small groove should be dug out at the brick joint at the leakage position of the bathroom floor, and then spray some waterproofing agent on the root of the water pipe, tile, tile joint, wall crack and other places around the leaking part. Reside.
Medical. Tips: Pay attention to the uniform spraying.
c.After the waterproofing agent 9 is dry, the small groove that was drawn out before is filled and repaired. For floor drains, water pipes, wall joints and other locations, it is necessary to strengthen the treatment with caulking paste to make the waterproof effect better.
It can also be made of plastic steel mud as a waterproof edge, but its position cannot be watered within 24 hours after maintenance.
-
Anonymous users2024-01-22Dig it up, clean up the garbage. The caisson is rebrushed waterproof, and the waterproof must be closed water experiment, and then backfilled. Backfill: Don't use these traditional backfills again.
Now our Guards backfill is a new process backfill, with lightweight, water-blocking, environmental protection, one-time pouring molding integrity, two hours to complete a bathroom backfill, and Chinese life insurance. You can tell me about it on the station.
The bathroom space is small, the structure is complex, and there are many pipe fittings, so it is easier to leak.
First of all, it is necessary to find the location of the water leakage, there are usually two situations of water leakage in the bathroom, one is water seepage on the ground, and the other is water leakage caused by broken water pipes. If it is water seepage on the ground, the waterproof layer needs to be redone; A new type of penetrating waterproofing agent can be used to re-waterproof the surface of the restroom, so that the water does not enter the ground and flows directly out of the waterway. If the pipe is leaking, the only way to do it is to change the pipe by planing the tiles and re-waterproofing.
Hello! I'm glad to answer for you, I'm here to provide you with a deal about the bathroom leakage repair method, I hope it will be useful to you, bathroom leakage repair should not be blindly repaired, first to figure out the cause of water leakage, in order to deal with it correctly. There are only two reasons for water leakage in the bathroom, the first is water seepage on the ground, and the second is water seepage from the broken upper and lower water pipes. >>>More
It depends on the degree of severity, if the leakage is small and the leakage point can be found, you can buy waterproof styrofoam to fill it, and if it is serious, you can only plane off all the bathroom tiles and facilities, re-do waterproofing, and re-paste the tiles.
Leaking water in the bathroom, leaking or leaking downstairs is a troublesome thing in life, which makes many people very annoyed. Now I would like to introduce to you the experience I have accumulated over the years, so that you can easily judge how to deal with it. >>>More