-
Anonymous users2024-01-23If there is an explosion, there are two main reasons: 1. Leakage. There is a gas leak, and the gas mixture is detonated during ignition; 2. Ignition failure.
According to the requirements, ignition and then ventilation should be carried out, and if there is a fault, there will be ventilation followed by ignition or two actions at the same time, which will also cause an explosion. You can ask professional maintenance personnel to come to check and repair.
You shouldn't be in a problem by what you say, but if you're chopping vegetables right next to the stove, it might be a bit of a problem. It is best to be at least two meters away from the stove and other burners with open flames.
-
Anonymous users2024-01-22Won't explode... Water heaters are all N valves to control the gas, generally the power supply is normal, there is a water flow, the ignition is successful, the temperature is normal, the exhaust is normal, etc. Finally, the electronic valve opens the gas!
N more than one is damaged together and all run out of gas before it can leak! "A broken water heater can't be used, since it's not used, the others won't be broken anymore" In addition, even if the exhaust is leaked, it is directly withdrawn!
-
Anonymous users2024-01-21The electrical design of the water heater is explosion-proof and has no hidden dangers.
-
Anonymous users2024-01-20I have a small question, did you buy an electric water heater with a gas water heater.
This is a no-no. can cause a fire.
Natural gas water heaters cannot be installed in restrooms. Because the gas water heater needs to consume a lot of oxygen during use, and the bathroom is a closed space, if the lack of oxygen in the bathroom is caused, a large amount of carbon monoxide, carbon dioxide and other toxic gases will be produced, which is easy to cause hypoxia and fainting accidents during the bathing process.
As long as your home is a newly bought water heater, the manufacturer can install it for you for free. Although you already have a solar water heater in your home before, since the pressure of the two water heaters is different, it is recommended that you install a set of shower faucets on each of the two water heaters, which is beautiful and easy to use.
The kitchen and toilet faucets suddenly don't have hot water? Excuse me: Can't get out of the cold water? If there is no cold or hot water, then it must be blocked, if cold water can be produced, it means that the pipeline is too long and cannot be insulated, and the pipeline needs to increase the insulation layer. You need to be clear.
It is recommended that you install it in a ventilated location as much as possible. >>>More