-
Anonymous users2024-01-23If you have only sprayed the primer and have not yet sprayed the topcoat, it is recommended to use a similar piece of wood, spray it without blue water, and spray it with blue water again after drying to see how the effect is. This is the only possible remedy, and it is difficult to remedy it with a topcoat.
-
Anonymous users2024-01-22The ratio of the polyester paint you said. Polyester paint, also known as PE paint, the so-called blue water and white water are its curing promoters. PE paint cannot be cured without adding blue and white water.
Tiannashui is mainly used to adjust the viscosity of the paint to facilitate construction. Note: Blue and white water cannot be transported and stored together, and blue water will explode when it encounters white water.
When mixing the paint, it should also be added in order.
-
Anonymous users2024-01-21If you just spray the primer and have not sprayed the topcoat, it is recommended to use a similar piece of wood to spray it without adding blue water, and then add blue water to spray it again after drying to see how the effect is. This is the only possible remedy, and it is difficult to remedy it with a topcoat.
In this case, there is basically no way to remedy it, but to remove the original primer and turn it on again.
The paint room is also lit during the day. If you don't turn on the lights during the day, the objects are not the same in all directions, and it is a bit difficult to save electricity. Painting is mainly important by reflection, so it needs a good three-dimensional light source, so the paint room also needs to work under a specific three-dimensional light source during the day. >>>More
The planks are relatively white and flat.
Such small places will appear. >>>More
Don't, sanding is before spraying the primer, sanding uneven places, defective putty.
Generally speaking, the primer plays a role of sealing, isolation, moisture-proof and mildew-proof, which is to cover the base layer of furniture and increase the grip of the furniture surface; The topcoat is the final coat in the painting, that is, the outermost layer, which has decorative and protective functions.