-
Docking can also be ah, the center is connected to a copper outer wire, the outer wire section must be free of burrs, otherwise it may not be tightly sealed.
-
Then buy a better one and a longer one.
r because coming to Ur
A pit, as long as it is a high-grade toilet, it is a pit.
The toilet is not able to pump water, which is a problem that every family encounters. So what is the reason for it? And how do we solve it? >>>More
The toilet flush is not enough, and the toilet is not flushed clean, which may be a problem with the toilet shifter, that is, the water outlet of the toilet is not directly facing the sewer pipe, and there is a curve in the middle, which is connected when the toilet is installed. It is also possible that the toilet is blocked, after the toilet is blocked, when flushing, the water level will slowly rise, and the toilet will not be flushed. It is also possible that when you use it, you don't have a good reason to do it, and you don't let go when you press the flush button, which will also cause the impulse to be insufficient, and you must press it for 2-3 seconds, so that you can completely open the flush valve, and the flushing effect can be the best.
The toilet inlet hose is 4 minutes in diameter and has a length from 15 cm to more than 40 cm, you can choose.