-
Anonymous users2024-01-23As you described! It should be that the water pipe coming down from your water tower is blocked or which valve is closed!
-
Anonymous users2024-01-22See if the cold water angle valve is closed, you can start checking from the angle valve, you can open the water tank cover on the seat side to see, whether there is a problem with the water inlet parts, the water parts can be adjusted, or the angle valve is also checked there!
-
Anonymous users2024-01-21It's not that there is a problem with the water pipe, then the trouble is big, let the master who walks the water pipe check it.
-
Anonymous users2024-01-20I guess it's a problem with the angle valve.
No, the water is all indoor tap water, the principle of hot and cold mixed faucets and water dispensers is the same, and the hot water faucet is hot water or tap water.
This is because the pressure of the hot water is relatively small, maybe you use it in the kitchen, and the water pressure in the bathroom will definitely be much smaller.
If the water is not hot, it is obviously a heating problem, please check whether the heater is normal. In addition, if the basin is far away from the heater, it is necessary to drain the cold water before heating it.
under the washbasin.
The hose connected to the angle valve and the faucet is now clogged because of the long-term contact with hot water, which causes the plastic gasket or plastic pipe to melt, it is recommended that you remove the hose to see if it is, if it is to change it, if there is no hot water from the beginning, it is that the water pipe construction is not done well and causes blockage, I hope it can help you. >>>More
The cold water faucet water pipe replacement joint can solve the problem, you are so cold and hot water pipe connection to the opposite, you are all connected to the reverse will be like this, all the reverse is good.