-
Anonymous users2024-01-23Install the ceiling first, and then penetrate the ceiling with a lengthened screw to do expansion screw installation, so that the installation is firm, and does not affect the appearance, you can also install a wooden keel or blockboard on the two ends of the drying rack, and install it with self-tapping screws.
-
Anonymous users2024-01-22Fix the drying rack to the bracket fixed by the roof insulation board, and if there is no bracket, you can only make 2 of them.
-
Anonymous users2024-01-21Fix the lift on the standing wall
-
Anonymous users2024-01-20There is no problem, now the installation of lifting drying racks is equipped with an extension screw, which can be fixed directly to the floor slab by the expansion head, even if the ceiling is tens of centimeters apart.
However, this is usually subject to an additional $50 fee.
Even if you open the window and have a screen, although it may not be able to prevent the danger, but it is better than nothing, in addition, why don't you say that it is much cleaner than hygiene, and you have the ability to use the cabinet and washing machine under the sun and rain, I admire you.
It is recommended to consult the mineral wool board manufacturer.
The living room can be equipped with a single-layer gauze curtain balcony can be equipped with a cloth curtain, (this effect is generally the gauze curtain is colored, the curtain is a solid color, the curtain is not patterned), it can also be a living room with a cloth curtain, the balcony is equipped with a gauze curtain, (this is the curtain and the gauze curtain are patterned) if the west sun is very strong and wants to shade the light, you can buy the shade curtain, but the living room is generally recommended not to use the shade cloth, so that the lighting is better, the living room is generally recommended to be half shaded curtains, the light is good, the living room is bright The whole room looked bigger.
Draw a line along the perimeter of the wall, punch the wooden needle under the electric hammer (including the wooden keel and the wooden needle fixed with the yin angle line), fix the keel around it, and nail the keel in the middle according to the width of the gusset to ensure that the gusset socket is well fixed with the keel. The four corners are also fixed. The last piece is narrower and can be thrown in.
The aluminum gusset screws are difficult to screw, and you can drill the hole first. >>>More