Toilet self flushing why

Normally, the toilet does not "flush automatically", do you mean the phenomenon of "constant running water"? There are generally two reasons for the phenomenon of "constant flowing water": one is that the control valve of the inlet pipe cannot be closed, resulting in water entering the water tank all the time, and then the water leaks out of the overflow pipe after exceeding; Another situation is that the flush bottom seat is not installed or the sealing ring is not sealed, resulting in water leakage from the water outlet to cause the washing surface to cause the "long flow" phenomenon, the solution is best to get the place where you buy the toilet to let him replace you, at present, many toilet water parts are guaranteed for five years, if the deadline is exceeded, then you can also let him pay you to change, a full set of water parts are generally about 50 yuan, plus other door-to-door costs, 100 should be about the same.

First of all, look at the toilet after the water is in, after the water level is in place, whether the water continues to enter (if it is still in the water, the water inlet accessories are broken, replace the treatment) and the water generated by the sealing ring is not sealed... Check it out for yourself!

If the drifting ball is too high, loosen the drifting ball positioning screws, move the drifting ball down and tighten it to see if it doesn't work, and then move it down. Until the overflow level is reached, the water will not be automatically discharged.

It is necessary to check whether the lower drain valve is broken, and if it is broken, it must be replaced.

The pressure rod inside is broken, so let's find a repairman to take a look.