How to adjust the deadbolt of the anti theft door to the left and right

Updated on Security door 2024-04-14
3 answers
  1. Anonymous users2024-01-23

    Anti-theft door deadbolt direction adjustment: 1. Before replacing the lock body, adjust the direction of the deadbolt first, otherwise it will not be closed.

    >2. At the position of the lock body close to the deadbolt, there is a small hole, use a screwdriver.

    Eject the deadbolt outwards through this hole.

    >3. After the deadbolt is ejected, you can easily adjust the direction of the deadbolt by hand, and adjust the left and right.

    >4. After adjustment, the deadbolt will enter the original hole, and you can press down several times with your hand to see if it can bounce back flexibly.

    >5. Finally, fix the entire lock body on the original anti-theft door to see if the lock tongue can be flexibly reset.

  2. Anonymous users2024-01-22

    There is a baffle behind the deadbolt in the lock body, the direction of the collar tongue is upward, the baffle is leveled, and the deadbolt is retracted into the lock body and rotated 180 degrees.

  3. Anonymous users2024-01-21

    Do not monotonously deadbolt, adjust the door lock, move to the left or right.

Related questions
3 answers2024-04-14

Don't file the door, if you can open the lock, maybe you can adjust it a little. In fact, it is much better to add some oil to the inside of the lock, wipe the surface around the deadbolt, and wipe the parts that come into contact with it (mainly because there is no dust and other dirt at the contact point between the door and the deadbolt).

3 answers2024-04-14

The anti-theft door opens left and opens the right feng shui——— the left opens smoothly, and the right opens the wind loop.

11 answers2024-04-14

If the anti-theft door cover is not closed tightly, the door closer can be adjusted by the following methods: >>>More

1 answers2024-04-14

Start with two aspects to solve the problem, one is if it is rusty because of lack of oil, put on some sewing engine oil or car engine oil. The second is to remove it and check the deadbolt spring, it may be broken or dislocated, and you can deal with it.

3 answers2024-04-14

It should be possible or there is a way to re-do it, and the installer at that time will contact him to see if he can adjust it again. >>>More