-
Anonymous users2024-01-23Toilet: refers to the distance between the center line of the drain of the toilet pipe and the finished wall, not the distance between the center line of the drain and the back of the toilet tank. The standard wall spacing is generally divided into two types: 305mm and 400mm.
Squatting toilet: The center of the drainage hole from the wall to the toilet is called the "pit distance", which is generally 30 cm or 35 cm, and the error is not more than 2 cm.
-
Anonymous users2024-01-22How far away the bathroom toilet is from the back wall is the standard.
The toilet is 300---320mm, the floor drain is 200mm, the wash basin is 80-120mm, and the drainage riser is 150mm. Floor drain is an indispensable hardware product in the decoration process of modern bathroom space, which can make the water on the floor of the bathroom space drain out immediately and keep the entire bathroom space dry, but if the bathroom floor drain drainage is slow, it will affect the normal use of the user. >>>More
The size of the bathtub is not only related to the size of the space, but also directly related to the functional design of the bathtub. The length of the general bathtub varies from meters to meters, and the depth is between 50 and 70 centimeters. The length of the bathtub below the meter, the depth is often deeper than the general bathtub, about 70 cm, this is often said to be a bidet bathtub, due to the small area of the bottom of the bath, this bathtub is easier to stand than the general bathtub, saving space and not affecting the comfort of use.
The sewer pipe can also be said to belong to the scope of hydropower, but it is installed by the mud shouting hall hydraulic, because the plumber installation may not be able to fit the toilet position, tile height and other issues, so the unified installation by the plasterer + settlement and infiltration car well backfill, at the same time in the hall.
The toilet reserves the distance between the sewer and the wall, and the toilet selection tool can be 30 cm to 40 cm according to the room type of the toilet and personal preferences, which is relatively normal, and the strong one who can reserve 20 cm in actual operation, and the actual distance from the center line of the sewer, the actual distance of the bridge deck can be 32 cm to 42 cm, and there will actually be an error of 10 cm, which is very normal.
The sewer pipe is generally made of PVC, which cannot be welded with a hot melter, and can only be bonded with PVC special glue; If it is a PPR pipe, then it can only be welded with a hot melter, and cannot be bonded with glue.