-
Anonymous users2024-01-23It is the water stop valve of the water tank that is broken, and it is generally not easy to repair, because it is all plastic parts. You have to go to the building materials store and buy a change.
-
Anonymous users2024-01-22Just lift the levitation device inside to control the water level.
-
Anonymous users2024-01-21There's a plug inside, so it's nice to adjust the float and the stopper
Hello! Take the water servant and the lid of the tank away, and see if the chain inside the water tank has fallen off? Did the float jam Liang Xiao? >>>More
Water quality may cause the failure of the water parts, you can take off the water valve, clean it with clean water, and then press it repeatedly, and install it after recovery, but do not move the small scale next to him, otherwise it will affect the function and water volume of the toilet. If you still can't, contact after-sales. Generally, this thing can be guaranteed for three years.
If your button is good, you can press it once, and you can't press it all the time!
The height of the side button is higher than that of the overflow pipe, so there is generally no water leakage. It may be that the water valve in the water tank is a little broken, and when the water is filled, the water is sprayed on the water tank cover and the button, and the water flows out along the button hole. It is best to replace the water vertical bumper valve.
The inlet valve float in the toilet bowl does not work, you can tie a rope to the connecting rod on the inlet valve float, pull the rope when the water is full, or you can change the inlet valve.