I would like to install hardwood flooring, but in order to reduce costs, I am going to get some good

Updated on Solid wood 2024-04-27
7 answers
  1. Anonymous users2024-01-23

    Theoretically it is possible, but it is very difficult to do, the cohesion of each board, flatness, paint, etc. are very big problems, it may be very complicated to do, it is not easy at all, and it does not save much money, now the pure manual is very expensive, far higher than the cost of the assembly line, so it is recommended to buy ready-made, if you work hard, go to the building materials city to seriously shop for goods, catch up with the activities or dump the goods, it is very likely to find a bargain of good quality and low price, and save a lot of things than doing it yourself.

  2. Anonymous users2024-01-22

    Where are you from? This one is generally more difficult to deal with. Cracks are inevitable in the use of ordinary floors. Unless the seams have special treatment. It also has to do with the weather temperature and so on.

    I thought, since it is more affordable, it is better to add a rubber strip between the floors without being too conspicuous on the floor. It is also easy to clean.

  3. Anonymous users2024-01-21

    If the carpenter and the lacquer worker are the masters of the masters, it is okay, and the cost performance is also worthwhile, and the opposite is very clear.

  4. Anonymous users2024-01-20

    It is impossible to buy good wood without knots and dry cracks If the wet material has to be dried Remove the knots and dry cracks, the availability rate of a cubic meter of wood is also about (and good wood boards) If the log is higher, this idea can only increase the cost A friend of mine bought a few days ago oak wood raw edge board 10 water is very dry The board surface is very wide, generally 40-50 The result is less than 40% The utilization rate is less than 40% 2650 party bought After use, it is equal to doubling the price.

    Suggestion: If you plan to live for a long time, you can lay floor tiles, although the cost is higher than that of composite flooring, but it will not fade after a long time, that is, the laminate floor should also be cushioned.

  5. Anonymous users2024-01-19

    You can buy laminate flooring.

    I am also newly renovated flooring.

    Much cheaper than solid wood.

    There is no need to wax maintenance

  6. Anonymous users2024-01-18

    There is no operability, I can say that you make it yourself in the end more expensive than you buy, I think you might as well lay laminate flooring, I have it at home, I have used it for two years, it is very good.

  7. Anonymous users2024-01-17

    It's not easy to get it, and the wood has a high-temperature treatment process to prevent deformation in the future.

Related questions
2 answers2024-04-27

The solid wood floor should be keeled, which can increase the elasticity of the floor, and the ground does not have to be flattened, and the wooden keel should be leveled. >>>More

1 answers2024-04-27

When laying flooring for home decoration, some people use solid wood flooring, and naturally some people choose composite flooring, which are made of natural wood, which looks very similar in appearance, but the methods of installation are not the same. >>>More

5 answers2024-04-27

1. Pavement ground leveling.

At the ground pavement site of the stadium, it is necessary to keep no more than 2mm uneven under the straight edge, otherwise it is necessary to adjust the level with appropriate materials. The uneven paving floor of the stadium can be leveled first by the artesian lawn. >>>More

1 answers2024-04-27

All rooms are leveled, the floor is marked, the floor is punched according to the regulations, the holes are stuffed with wooden sticks, the wooden keel is laid, the keel is adjusted according to the horizontal line, the floor is laid, the baseboard is installed, and the paint is touched.

8 answers2024-04-27

At the beginning, there is a groove close to the wall, and if it is finished, the tenon is on the side.