-
Anonymous users2024-01-23Anti-noise method, installation method: heat and sound insulation cotton board or cotton + wood keel (or light steel keel) + wood board or gypsum board (and then brush paint or paste wallpaper), general carpenters will do. The red Owens Corning soundproof cotton board or Owens Corning soundproofing cotton must be bought by yourself, otherwise the carpenter will help you buy very bad cotton.
-
Anonymous users2024-01-22It's better to cover it with foam wrapped in air conditioning pipes.
-
Anonymous users2024-01-21Wrap it up with insulation and you're good to go.
Generally, the hot and cold water pipes in the bathroom are basically at a distance from the ground meters, this height is generally suitable for the washing machine and the mop bucket to receive water, if the home is ready to use the kind of automatic washing machine, it is best to keep it above the meter, the water pipe faucet can be installed when it is high, and other hoses can be installed to connect the water, and it is impossible to connect it if it is low.
It is best to use a small union of internal teeth, straight or curved, depending on the situation on site. The use of outer wires, direct or bent joints is an incorrect connection. The material of the pipe and pipe fittings should be matched, and the following plate is just an example of PPR. >>>More
The height of the bathroom basin and kitchen basin is 45 cm high from the ground. If the bathroom sewer pipe enters the wall, the height is 35-40 cm high. The distance between the hot and cold water pipe joints is only 14-15 cm for the shower mixture, and the rest of the distance can be installed and operated as long as it is good.
Generally, the hot water is on the left, the cold water is on the right, and you can see the faucet yourself, which has a hot and cold logo on it.
There are relevant standards, and the distance between the two needs to be 10-15 cm or more. >>>More