-
Anonymous users2024-01-23It can be achieved. If you are weak in hands-on ability, then the router and the cat are either put in the living room, or both in the multimedia box, or add a network cable between the living room and the multimedia box.
Let's start with how to use the lines you have now.
1.First find the network cable in the multimedia box and the living room, and it is best to use the line tester or 10,000 if there is no mark.
Choose 1236 to do a crystal head sorting, don't make a mistake by stuffing the 1236 into the crystal head, be careful. Then the remaining 4578 makes another crystal head, 4578 line corresponds to the 1236 position of the crystal head, do not mix, and then the other end of the line, that is, the network socket in the living room, remove the crystal head, and subtract the crystal head, just like at the end of the multimedia box to make 2 crystal heads.
After it is done, it is equivalent to having 2 network cables between your living room and the multimedia box.
2.In the multimedia box, insert a network cable into the cat, remember which one, and then plug the network cable corresponding to the living room into the WLAN port of the living room router. Plug another network cable into the LAN port of the router.
3.The network cable in the multimedia box is connected to the crystal head in the bedroom, which is done normally, and then buy a network cable connection plug (that is, the connector can be plugged into the network cable to connect to a piece, about 2-5 RMB), if you don't buy two network cables, connect directly. But be careful not to connect the wrong wire.
It depends on whether the light source supports tmall elf,The landlord can look at the moon shadow Kaiton,They have an intelligent light source at home,The technology is very mature,And the quality and service are guaranteed。
Mine is a 700D model, I don't know if it's the same as yours. Hold down the SET button under the snowflake button in the lower left corner, wait for it to start flashing the temperature adjustment, and then press the SET button after adjusting to your ideal temperature. Generally, the manufacturer sets 4 degrees, and it can also be lowered again, which is the cost of electricity.
It's best to talk to the gas company (it doesn't matter if someone else says it). Otherwise, if you move it, you still won't be able to use it, and you will have to toss.
They will all mature, they will all grow old, and there is no need to worry about it.
If it is a personal bathroom, after the leveling is cleaned, you can use cement-based waterproof coating to directly construct without leveling.