The optical cat and router in the bedroom are afraid of radiation, can they extend the cord and move

Updated on Living room 2024-04-16
2 answers
  1. Anonymous users2024-01-23

    You can lengthen the network cable to move to the living room, and the routing is inconclusive whether the radiation is big or not, in short, it is much smaller than the wireless transmission tower of the mobile phone.

    It's best to disconnect the power supply of these devices when you are not using the router, so that you can rest assured that there is no radiation, and second, the power off will better protect the route and the operation will be more stable.

  2. Anonymous users2024-01-22

    OK. But the fiber optic line cannot be connected. Or you can only use a special interface.

    You can put the optical modem in your room, and then you can go through the network cable, connect to the lobby, and the router is connected to the lobby.

    Enter the background of the modem and turn off the wireless of the modem. Can.

Related questions
There are optical modems and routers in the living room, and there is a network cable interface in t
4 answers2024-04-16

Judging from the phenomenon you described, it may be caused by the network cable connected to the bedroom is not connected to the LAN port of the router, you go and check it.

The router and the fiber optic cat at home are in the bedroom, and the bus box is in the living room
2 answers2024-04-16

In the bedroom, the optical modem is connected to the router, and a network cable is connected to the wall skin network cable to the bus box, and a switch is added to the wire box, and the network cables in the other rooms are connected to the switch.

Is it better to put the light cat and router in the bedroom or living room
1 answers2024-04-16

Specific location: router, power cat (wireless extender) can choose to add a place with a 220V power socket in the living room, if you add a router, if there is a reserved network cable in the living room, then put it in a place with a reserved network cable.

The living room optical modem is connected to the bedroom wireless router, connected from the wall m
2 answers2024-04-16

The two openings of the wall are not docked, or you have found the wrong corresponding opening, or they may have been sloppy during the construction.

The network optical modem and the router are in the living room, and I want to install a router in t
2 answers2024-04-16

In the LAN port setting of the route, change this parameter to be not in the same segment as the gateway of the previous route, for example, the main route is, then the second route is changed, and the other settings of the route can not be moved, change the LAN port and set the wireless password, and the network cable from the first route is plugged into the WAN port of the second route