The tiles in my bathroom always feel that the shower room will be slippery, and putting a non slip m

Updated on Bathroom 2024-04-09
3 answers
  1. Anonymous users2024-01-23

    Actually, there is no need to worry about this at all. The Terrence tiles in my home, which I have for the elderly and children at home, have never slipped until now. As for the feeling in your heart, you can let the store process and groove the floor tiles of your shower room, which can also play a non-slip role and be beautiful.

  2. Anonymous users2024-01-22

    There are two ways, first, directly replace the tiles that do not slip, and second, polish the surface of the original tiles, and then spray a layer of oil with beautiful colors, so that it will not slip.

  3. Anonymous users2024-01-21

    Search the Internet for a non-slip fluid. It has a good anti-slip effect after being painted on the tile, and it is not expensive, you can try it.

Related questions
1 answers2024-04-09

1. Before tile paving, standardize the acceptance and reasonable protection of the waterproof layer and water circuit transformation to prevent damage to the tile during construction; >>>More

2 answers2024-04-09

I only know that the dry paving is done before the waterproofing project poured asphalt as a waterproof layer, and then the tile is relatively simple, not with a lot of cement mortar for paving.

8 answers2024-04-09

There are three ways to deal with it:

1. The most economical thing is to brush epoxy resin paint on the premise that the base surface is a flat concrete base surface (that is, the cement surface is smoothed), and you can brush it yourself. Painters have zero foundation, you can buy a small roller to roll slowly, buy domestic, generally more than 100 a bucket, an ordinary bathroom can be brushed again, don't worry, buy a bucket to brush again. There are a variety of colors to choose from, and colorless ones can also be selected, but to look good, the original concrete base surface must be made very flat and flowerless, so if you want a clear water effect, I generally recommend directly choosing the appropriate gray. >>>More

4 answers2024-04-09

Bathroom above the waistline, if it is a diamond-shaped shop, the floor is best a long shop, otherwise the vision will be very messy. Because of the small area. Kitchen The diamond-shaped paving in the middle of the cabinet is more beautiful, and other walls can be paved normally, and the kitchen floor can be paved with a diamond-shaped pavement, which is more compatible with the cabinet. >>>More

12 answers2024-04-09

First, choose tiles with low water absorption, generally speaking, high-quality tiles have very low water absorption, so that they can dry quickly. If the tile does not indicate the water absorption, you can use tea or water droplets on the back of the tile, and check the diffusion degree of the water droplets after a few minutes. Tiles with high water absorption rate will be cracked on the surface of the tiles and peeling off the entire wall and floor tiles after thermal expansion and contraction. >>>More