My router is in the living room, and I can t get a signal in my room

It is impossible to build bridges, it seems that there is no such equipment.

When you don't receive the signal, because the router signal is already very weak when it reaches your room, it is blocked by the wall.

Therefore, the computer can't recognize it, so it is recommended to change the high-power router.

Or go to the living room where there is a signal to surf the Internet.

You can install a power modem plus AP, which is a perfect solution! There's also how you wiring it, and then there's bridging.

The landlord will provide you with two methods.

Method 1 Method 2.

Replace high-power wireless routers.

Retrofit wifi amplifier.

Answer: A wireless router is installed in the living room, and there is a room where the wireless signal is not good, which is already a common phenomenon. To solve this problem, there are various methods to choose from, each of which is explained below. If there is no reserved network cable in each room during the early wiring, you can use the power modem to expand the wireless network signal.

At present, many power cats themselves are a miniature router, so power cats can solve the problem of poor wireless signal coverage at home.

Connect one power cat to the LAN port of the wireless router, and put the other power cat in a room with poor wireless signal, and then make a simple setup and you can use it. At present, a pair of gigabit power cats is about 200 yuan. Install the wireless signal amplifier to put the wireless signal amplifier in the room with poor wireless signal, and then connect with the original wireless router at home, which is very convenient to install.

The price of the wireless signal amplifier is about 100 yuan, which is relatively cheap. However, the wireless signal amplifier is not very effective, because the wireless signal amplifier has to receive the signal of the living room wireless router first, and then amplify the signal. If a strong wireless signal is not received, how can the wireless signal amplifier optimize the signal?

Install a wireless router If you want to solve the problem of poor wireless signal in the room, the most effective way is to install a wireless router. Of course, the premise is that there must be a well-laid network cable in the room.

If the room has a well-laid network cable, plug the network cable of the room directly into the WAN port of the wireless router, and select "dynamic IP" for Internet mode. Then set the name and password of the wireless network. It should be noted that the IP address of the wireless router in the room is not in the same network segment as the IP address of the wireless router in the living room.

For example, if the wireless router management address in the living room is the secondary routing management address of the room, the secondary routing management address of the room should be to avoid conflicts.