How to install a kick flush toilet?

Updated on Toilet 2024-04-02
4 answers
  1. Anonymous users2024-01-23

    Kicking the flushing toilet, this is needed to be carried out at the time of decoration, generally this needs to communicate with the decoration company in advance, and you need to contact the decoration company.

  2. Anonymous users2024-01-22

    It is recommended to refer to the manual. It can be installed correctly.

  3. Anonymous users2024-01-21

    Is there such a rough and brutal flushing toilet?

    It's a foot pedal, right? I'm not going to take you!

  4. Anonymous users2024-01-20

    To the normal toilet. What's the difference between installation?

Related questions
2 answers2024-04-02

The water outlet is aligned with the sewer outlet, and the horse is placed horizontally.

1 answers2024-04-02

1. Take out the pipe plug of the ground outlet, check whether there is any debris in the pipe, and then clean the nozzle. >>>More

6 answers2024-04-02

The straight-flush toilet is to use the impulse of the water flow to discharge the sewage, the siphon toilet, the drainage pipe structure presents the "" type, and the pipe is filled with water will produce a certain water level difference, the toilet of the vortex siphon, its flush port is located on the bottom side. >>>More

1 answers2024-04-02

When flushing, the water must be ventilated into the sewage pipe, that is, one in and one out, but when flushing, the air only enters and does not come out, which will cause the water to flow very slowly in the seat, either the air hole of the sewage pipe on the floor is blocked, or the master has changed the underground sewage pipe when making the pipe.

10 answers2024-04-02

The toilet is a very important piece of household equipment in daily life, so if it has problems, it may bring a lot of trouble to our lives. If your toilet flushes poorly, don't panic, here are some things you can do to fix the problem. >>>More