Method of installing solid wood flooring

Õ¹¿

¬Æ15mm£¬µ

1.There are four ways to pave the floor.

The solid wood floor can be paved on the cushion by keel pavement, suspension pavement and elevated pavement, and the viscose straight pavement method can be paved on the base layer.

2.Fix the floor nails.

The hardwood floor assembled with tongues and grooves should be nailed into the groove at an angle of 30° 45° when fixed; Hardwood floors should be drilled first, and the hole diameter should be slightly smaller than the diameter of the floor nails. The length of the floor nail should be multiple of the thickness of the board. The nail cap should be smashed flat and rushed into the plate.

3.Select a fixed point.

The fixing points of paving solid wood tongue and groove floors should meet the design requirements. When there is no requirement in the design, when the length of the floor is less than 300mm, there should be 2 fixed points on the side, and when the length is less than 600mm, there should be no less than 3 fixed points; When the length is less than 1000mm, there should be no less than 4 fixed points; When the length is less than 1500mm, there should be no less than 5;

4.Glue straight paved to decontaminate.

The base layer (cushion) paved by the adhesive direct paving method must be smooth and free of oil stains. When fully paved, the base layer (cushion) and the back of the floor should be brushed with glue to ensure the bonding area of the floor.

5.The baseboard should be slotted and anti-corrosion treatment is indispensable.

Solid wood baseboards should be ventilated on the back of the wall and treated with anti-corrosion. The depth of the ventilation groove should not be less than 5mm, and the width should not be less than 30mm, or meet the design requirements. The baseboard should be nailed to the anticorrosive wooden block with open nails, the nail cap should be smashed flat and rushed into the board surface, there is no obvious nail hole, and the baseboard should be vertical and the upper mouth is horizontal.

6.Pavement should meet the standard, and inspection is indispensable.

The wooden keel and wood-based panel cushion should be installed firmly and straight, and their spacing, stabilization methods, moisture-proof isolation layer and waterproof node treatment must meet the design requirements. Inspection method: observation, foot inspection.

7.The panel should be selected and inspected.

The plain board should be planed and polished, with no obvious planing marks and burrs. Parquet flooring should have a clear pattern, uniform color, and a clean surface. Solid wood flooring should be selected before the lacquered panel is paved. Test Method: Observation, Hand Touch and Foot Inspection.

8.Skirting boards, to be smooth, height and so on.

The skirting board surface should be smooth, with tight seams and consistent height. Inspection method: observation and steel ruler inspection. )

As the saying goes, three points rely on the material and seven points of installation, please be sure to find a professional to operate when installing, and the material installation method is not different.

Lay the keel underneath and fix the hardwood floor with Mesha nails on top!

Hardwood flooring is a premium flooring material that excels in both durability and aesthetics. When installing solid wood flooring, you need to pay attention to some details and skills to ensure the quality and stability of the floor.

1.Determine the installation method: solid wood flooring can be divided into two installation methods: suspension and paste, the paste method is suitable for traditional solid wood flooring, and the suspension installation method is suitable for modern composite solid wood flooring and solid wood antique flooring.

It is necessary to choose the appropriate installation method according to the material of the floor and the environmental situation.

2.Preparation: Before installing the solid wood floor, the floor needs to be cleaned to ensure that the floor is flat and free of unevenness, so as not to affect the installation and aesthetics of the floor. It is also necessary to prepare floor mats, floor protection strips, edge strips and other related materials to ensure the installation effect and protect the floor from damage.

3.Measuring and trimming: Before installation, the size of the floor needs to be measured according to the size and shape of the room, so that it can be cut and adjusted during installation. When cutting, you need to use a sawing machine or chainsaw, make sure that the cut is flat and do not cut too much to cause a notch in the floor.

4.Laying the floor mat: The purpose of laying the floor mat is to prevent the floor from contacting the base layer and reduce the moisture and sliding of the floor, so as to further increase the service life of the floor. There are two types of floor mats: plastic and foam, and it is necessary to choose the right material for laying according to the actual situation.

5.Splicing the floor: Apply the appropriate amount of glue to the floor and put the floor together in the way of a puzzle. It is necessary to pay attention to the reasonable distribution of the gaps in the floor in the room, which can make the floor more stable in later use.

6.Install the floor protection strip: glue the floor protection strip according to the required length and stick it on the edge of the floor, which can prevent the floor from being rubbed and scratched by the outside world and further increase the life of the floor.

7.Check the floor: After the installation is complete, you need to carefully inspect the floor to ensure the flatness of the floor and the tightness of the joints. If there is a problem with the floor, it needs to be adjusted in time.

To sum up, the installation of solid wood flooring is a relatively complex process that needs to be carried out carefully and carefully. The correct installation method and detail treatment can greatly improve the life and aesthetics of the floor, thus bringing more comfort to our lives.

1. To ensure that the ground is flat, it can be determined by the method of ground leveling, the most important thing is to calculate whether the door can not be opened after the floor is laid, according to the old fire installation method, the total height of the wooden floor laying hall is 27mm, and the uneven ground must be leveled with cement in the early stage.

2. Clean the ground first to ensure that the ground is dry.

3. Hit a layer of asphalt oil layer, the reason for this is to prevent moisture and insects.

4. The floor is generally made of high-quality 7 centimeters fine core board, and some people use 12 centimeters, 9 centimeters of the board are cut into four pieces according to the cross equal parts, Zheng let there be a gap of one centimeter between each small piece, and then use it to drill holes in the ground and drive into the wooden nails, and then drive the steel nails into the wooden nails to fix the board and the ground, (Note: the bottom plate should not use MDF or large core board).

5. Lay plain log floor, hit the four sides of the board with nails, the number of nails on the long side of the side is 4, the short side is two, but more than the less, (Note: it is best to use 903 glue for laying wooden floors, and there will be big problems with the use of white latex 107 glue, because white latex is water-based, too much will make the wooden floor arch by moisture, when the solid wood floor is laid, keep a distance of ten millimeters from the surrounding walls, and this gap can be covered by the baseboard in the later stage).

6. Continue other engineering projects, and let the paved floor be left for a few days, which can be long or short, and not less than five days.

7. Polishing the floor, at least three times, and the sawdust powder after the second time should be retained.

8. Use the retained sawdust powder to make putty to fill the gaps between the boards.

9. After laying for a day, wipe the surface of the board thoroughly with a clean towel, and it is best to vacuum it again.

The common solid wood floor installation method is also the best solid wood floor installation method, and it must be the traditional installation method of the wooden keel. The advantage of using the installation method of wooden keel is that the structure is more stable and more moisture-proof. And the solid wood floor installed in this way will also feel better.

Generally, experienced installers will help you mark the laying position and height of the wooden dragon on the floor, and then fix the wooden floor and lay moisture-proof film and other materials. After laying the wooden keel, you can lay the solid wood floor, and it should be noted that when laying and installing the solid wood floor, it is necessary to pay attention to the appropriate expansion joints reserved between the solid wood floors, otherwise the solid wood floors will be deformed due to thermal expansion and cold contraction. In the process of solid wood floor installation, it is best to ask a professional solid wood floor installation team to install, especially some flooring companies have an installation team dedicated to serving dealers.

For example, the five-star service team of Beyak flooring allows users of Beyak flooring not to worry about the use of solid wood due to installation problems. And in this way, the installation cost of solid wood flooring will also drop a lot.

1. Paving process: first of all, the trial paving, the solid wood floor from left to right or from right to left in turn, the side of the groove faces the wall, fills the gap between the wall and the floor with a wooden wedge, checks whether the gap and the height difference are qualified, and then applies sizing if possible.

2. Advantages: The laying operation is relatively simple, which can greatly reduce the project period. If there is damage in the later stage, local repair work can be carried out.

Best way to install solid wood floors2

Second, the solid wood floor paving method - keel laying method.

1. Paving process: first leveling and cleaning the ground base, and then according to the length and direction of the floor laying, the general position of the keel to be laid with elastic wire is ejected with elastic wire, and the keel can be laid, and the keel is fixed using the method of electric hammer drilling, and the depth should be more than 25mm. After installing the keel, the floor can be pre-laid, and the floor can be installed after there is no problem.

2. Advantages: The keel laying method is the most traditional and classic laying method for solid wood flooring, which is suitable for all tongue and groove floors.

The best way to install solid wood flooring 3

Third, the solid wood floor paving method - direct paste laying method.

1. Paving process: The direct laying method is to bond the solid wood floor directly to the ground through the adhesive, so the treatment requirements for the base layer are relatively high, and the smoothness of the base floor must be ensured. This method is more suitable for laying solid wood floors with a length of less than 30 cm.

2. Advantages: It is very simple and convenient to install, saving time and trouble.