-
Anonymous users2024-01-23When designing, the designer was not asked to plan well, and this kind of problem is the result of reworking waste, which is the result of saving design costs.
In the current situation, the chandelier should not be placed in the middle of the shed, and it is necessary to consider aligning the ground sofa, TV cabinet and TV background wall, so that it looks good.
As for the deviation from the middle of the shed, it can only be adjusted as much as possible, and the deviation of the chandelier installation must not be seen within 10cm.
-
Anonymous users2024-01-22The hollow shape is to make two "steps", given that the floor of your house is relatively low, each step is about 12 cm (height); From the wall to make 400, 600 requires a relatively large space, and 200 300, it is not convenient to install lamps and lanterns, and it does not look good.
-
Anonymous users2024-01-21That bezel is in that position.
Wooden keel skeleton. If there is no baffle, you can clearly see the wooden keel... It's normal to be able to see the baffle. Because there must be a wooden keel skeleton fixed to the ceiling, this ceiling not only needs to be fixed from the wall, but also the ceiling. This is for security reasons.
Old-fashioned houses, the floor is high, so they are usually hung 60cm wide, and the relative people stand lower, and the visual angle is relatively large, so the old-fashioned light trough ceiling is not easy to see the baffle.
You're right in this situation. No fuss.
-
Anonymous users2024-01-20You can set up a small screen in the aisle, you can take a transparent lattice, so that the space is separated and not spacious, the ceiling can be divided into two parts, living room and dining room, which is not narrow and clear.
-
Anonymous users2024-01-19The designer's design always has its own style, the living room area is relatively large, and it is also a very good design technique to lower the ceiling to the bottom of the beam to cover the beam, and the hidden lamp of the ceiling can also play another beauty.
The amplitude of 200mm protruding from the wall is quite reasonable, and it is a solution that can be considered.
The height requirements of the restaurant space are not so high, and it is simple and refreshing.
-
Anonymous users2024-01-18It is normal to see the baffle, and the wellside ceiling is hung by the baffle, and it is not firm without the baffle.
-
Anonymous users2024-01-17You can get a picture.
It's easy to do with a picture.
-
Anonymous users2024-01-16Can you send a picture to see if you can?
You don't have to think about security. Just make the glass bigger, and you won't fall off if you put it on it.
1. All that baffle blocks the wooden keel skeleton in that position. If there is no baffle, you can clearly see the wooden keel... It's normal to be able to see the baffle. Because there must be a wooden keel skeleton fixed to the ceiling, this ceiling not only needs to be fixed from the wall, but also the ceiling. This is for security reasons. >>>More
There is no need to dismantle the ceiling.
The general downlight has a buckle inside, and the carpenter installed it from the outside when it was originally installed, so you only need to remove the wires from the lamp, and then buy a new one according to the diameter of the current downlight. >>>More
Generally speaking, the height of the room can not be less than meters, if you want to fill the ceiling along the bottom of the beam, as long as the room is not less than the meter, if you don't have a ceiling, because this beam is just in the middle of the living room and the dining room, in fact, the two halls are divided, even if you don't do it, it doesn't matter, there is no problem of the beam pressing the top, you can also make a pass, you can.
Make a secondary ceiling so that the surroundings don't look deep! A little suggestion.