Is it caused by a crack in the wall or something else if there is a crack in the waistline brick of

Updated on Toilets 2024-04-03
2 answers
  1. Anonymous users2024-01-23

    The cracks in the toilet waistline bricks are not caused by cracks in the walls.

    1. The cracking of the waist line is due to the hollowing of the paving. After the tile is paved with a hollow drum, the waistline cracks due to uneven force.

    2. Due to the glazed waist line brick due to multiple glazing calcination, in the process of multiple glazing calcination, if the newly added glaze layer has poor binding strength with the original brick, it is easy to have the problem of glaze cracking in the later use process.

    If there is a hollow drum, the responsibility is the construction party, if there is no hollow drum, there should be a tile seller and the manufacturer responsible.

  2. Anonymous users2024-01-22

    There are two main reasons for the cracking of the waistline:

    1. There is a hollow drum in the waist line paving, after the tile is paved with a hollow drum, the cement mortar in the hollow drum area and the place where there is no hollow drum is inconsistent in the case of thermal expansion and cold contraction, and the waist line is cracked due to uneven force.

    2. Now the common glazed waist line brick products are produced due to multiple glaze calcination, in the process of multiple glaze calcination, if the newly added glaze layer and the original brick combination strength is poor, in the later use process, it is easy to appear glaze cracking.

    Judging the method: it is recommended to first check the construction quality of the paved waist line, especially the hollow drum, if there is a hollow drum, the responsibility is the construction party, if there is no hollow drum, there should be a ceramic tile seller and the manufacturer is responsible.

Related questions
4 answers2024-04-03

Cause Analysis:

1. The quality of the tile is not good, and the strength of its own embryo body is poor; >>>More

1 answers2024-04-03

Kitchen and bathroom wall tiles are generally 300*600, floor tiles are 300*300, waist line is 70*300, and 80*600 can also be used. >>>More

3 answers2024-04-03

Stick three pieces vertically and start to stick to the waist line, and the bathroom is 300*450 vertically.

2 answers2024-04-03

Generally, but if it is home, it can be determined according to the height of the family, and you can choose between meters, which is good looking and practical.

6 answers2024-04-03

The cracks between the balcony and the wall on the second floor of the brick-concrete structure may be due to the quality of the balcony cantilever slab, I don't know how to do it, generally the balcony is brick-laying on the cantilevered board, if the balcony is a load-bearing wall, there should be a structural column on the balcony side, or the whole wall is divided from the balcony and leave a door opening. >>>More