Whether it is better to flush or siphon the toilet

From the perspective of flushing methods, toilets can be roughly divided into: flush type (ordinary flush) and siphon type. The difference between the siphon type and the ordinary flushing method is that it flushes the water while achieving the siphon effect through a special curved pipe to quickly discharge the dirt.

The siphon type is divided into flush type, vortex type, jet type, etc.

The siphon vortex type and jet type are equipped with a special water inlet channel, and the water from the tank flows into the toilet under the water level, so as to eliminate the noise generated by the air impact in the pipe and the water falling when the water enters the tank. That is, the "silent toilet" currently being implemented on the market. The siphon jet type has a unique water nozzle that can spray a strong stream of water for better flushing results.

Buy a siphon.

No matter what kind of toilet it is, it splashes water, and so far there is no absolute toilet that can not splash water.

Unless you buy a toilet with a small spacing between the water cover and the sitting edge, this situation will be better. Otherwise, it's all splashed.

Siphon type deodorization, low noise during washing, water saving.

However, it also depends on the situation of the toilet sewage pipe, if the sewage pipe is that U-shaped, it can only be used in the direct flush type; If it is not bent, you can use the siphon type.

Flush toilets are noisy when flushed, while siphon toilets are very quiet. The principle of scouring the two is different, so the structure of the barrel is different. In contrast, the siphon toilet has more advantages, such as a larger flushing force, and the relative water consumption (some toilet designs) is smaller.

Moreover, the siphon type appeared after the flush type, so the siphon toilet on the market is gradually occupying the market and has the tendency to replace the flush toilet. In the siphon toilet, there are several subdivisions according to the structural principle. But in general, it's all the rainbow principle.

From the price point of view, the toilet of the same brand, the siphon branch is more expensive.

Siphon type deodorization, low noise during washing, water saving.

However, it also depends on the situation of the toilet sewage pipe, if the sewage pipe is the kind of U-shaped bright collapse, it can only be used in the direct flush type; If the circle is not bent, it can be used with a siphon. Brigade.

They have their own pros and cons, and they should be considered comprehensively when purchasing.

1. Seek a balance between water saving and flushing rate However, due to the focus of the topic of water conservation, a new question has arisen: under the premise of ensuring the impulse, is it a direct flush or a siphon water saving? Whether a toilet saves water depends on two aspects, one is the water tank and the other is the bucket.

The difference between the barrel part is the difference between straight punch and siphon. Represented by some European brands, they are all straight flushing, using British design standards, characterized by simple flushing pipelines, short paths, and thick pipe diameters, generally with a diameter of 90 to 100 cm, and the use of water gravity acceleration can easily flush away the filth.

2. The key to determining whether the pipeline area is easy to block the water-saving performance of the toilet lies in the coordinated design and installation of the entire flushing system. In the past, the reason why the flushing volume of the toilet could not be controlled was mainly due to the fact that the toilet was assembled as a piece, and the water-saving performance of each part could not be coordinated and unified. The straight-flush toilet is currently less varied in the market, and the performance of this type of toilet is better than that of the siphon type, but at present, there are fewer such molds of domestic manufacturers, and this situation has appeared in the market.

Moreover, there is no backwater bend in the design of this toilet, and it is not easy to cause blockage compared with the siphon type in the flushing process.

These two flush toilets have their own pros and cons, the water-saving effect of the flush toilet is better than that of the siphon toilet, but the noise is relatively loud (when flushing), the siphon toilet uses more water, but the silent effect is good, and it is also better than the flush toilet in terms of sewage and odor prevention.

Advantages and disadvantages of flush toilets.

The biggest advantage of the straight flush toilet is that the water pipe is relatively simple, and the process is short, and the sewage function after increasing the intensity can flush the filth cleanly, and it also has the advantages of water saving, no blockage, and strong flushing strength. The biggest disadvantage is that the sound is a bit loud, and the water inlet is small, which is easy to form dirt.

Advantages and disadvantages of siphon toilets.

The drainage pipe structure used in the siphon toilet will have more water in the pool, but the flushing sound is not as loud as the straight flush toilet, and it also has a very good anti-odor function, which can flush out the dirt in the pipe, the only disadvantage is that there is a lot of water, and a certain amount of water can be used to achieve the purpose, at least 8 liters of water are needed each time, relatively speaking, it is more wasteful, the diameter of the drainage pipe is smaller, and it is easy to block, so you can't throw the paper inside.

Toilet failure, home problems, you can find a master Bang professional master door-to-door service.