-
Anonymous users2024-01-23Doing geothermal heating in the bathroom is a headache, after doing geothermy, the waterproofing of the surface of the ground is always not good, in order to do it once and for all, it is recommended that you cut off the geothermal water pipe in the bathroom, and then find a mason to redo the ground. Because I am engaged in decoration, the floor heating of the bathroom I did a few years ago basically has problems, and the repair is high.
-
Anonymous users2024-01-22Find out the location and cause of the leakage, and plug the leak according to the cause and location of the specific leakage. Finding out the cause and location of the leak is a very technical professional job, and it is basically impossible for non-professionals to do it. It is recommended to find professional technical personnel to come to the site, put forward rectification suggestions and repair the leakage, and ask professionals to sign a maintenance contract with you at the same time as the maintenance, and provide a 5-year free warranty warranty.
The geothermal pipes are leveled with cement and sand, and they can be brushed with silicone waterproof paint at one time - all kinds of waterproof materials can be operated normally, and there is no need to taboo the underfloor heating pipes!
Start by finding the cause of the water leak. Then you can get it yourself, and if you can't call it waterproof, someone will do it for you.
The floor drain is filled with water, the foot of the toilet bowl including the screw hole should be sealed, check whether the connection between the sewer pipe of the washbasin and the underground sewage pipe is sealed, my house is plugged in without sealing, so there is a smell running out of the interface. Seal it with electrical tape or glass glue.
Maintenance method: 1. Check the circuit; 2. The electric switch is pulled off and the waterproof cover is pried open; 3. disassembling the switch; 4. Remove the wires on the old switch panel and fix them on the new switch panel; 5. Installing wires; 6. Restore the switch panel. For detailed steps, please refer to the following: >>>More
How to replace the integrated ceiling light in the bathroom - replacement steps. >>>More