-
Anonymous users2024-01-23If the dark water pipe on the bathroom wall is leaked by a percussion drill, the main gate must be turned off first, and then the water pipe must be replaced or the water pipe must be welded to death. You can also use two pieces of iron to make a hoop, wrap it in rubber in the middle, and tighten it with screws. Also, go to the hardware store and have a vacuum bag made of epoxy resin, which contains epoxy resin and bandages and other things, or turn off the water pipe and replace the water cut-off pipe.
Concealed pipes refer to the use of underground pipes to discharge sewage. Commonly used pipes include tile pipes of different shapes and specifications, terracotta pipes (glazed on the pipe wall), cement soil pipes, cement mortar pipes, coarse sand concrete water filter pipes, plastic pipes, as well as bamboo, wood, brick, stone pipes, etc.
1) The design of the waterway should first think about all the equipment related to water, such as: water purifiers, water heaters, kitchen treasures, toilets and wash basins, etc., their location, installation methods and whether hot water is needed;
2) It is necessary to think about the use of gas or electric water heaters in advance, and avoid temporary replacement of water heater types, resulting in repeated transformation of waterways;
3) In addition to leaving the water outlet for the wash basin, toilet, washing machine, etc., it is best to take one out, and it is very convenient to receive water and mop the floor in the future.
4) After the location of the washing machine is determined, the drainage pipe of the washing machine can be considered to be made into the wall, which is beautiful and convenient;
5) There should be a suppression test after the waterway renovation, but many decoration teams do not have a suppression test.
6) It is best to have the owner present in the suppression test, which can play a supervisory role; Because some renovation teams will deceive the owner in this link. The method is: when pressing, open the "return valve" of the pressure pump to form a loop, although the pressure pump seems to be working, but there is not much pressure in the pipe, especially for the electric pressure pump.
-
Anonymous users2024-01-22Only when you open it can you clearly see the water pipes and loopholes. Turn off the water pipes. When there is no water in the pipe, fill it with glue.
Of course, this can be fixed with screws, so pay attention to it when you fix it, and don't be able to hang someone else's.
There are two ways to deal with it. One is to disassemble the leaking part, replace it with a good tube, and then repair the wall. This method is more labor-intensive and costly, but the effect is better after processing. The second is to switch to open pipes. This method is quick to process, but takes up space and requires a lot of maintenance.
The infill wall of the frame structure building is also not allowed to open transverse grooves, because the wall itself also has the problem of self-weight and horizontal load, and the wall is very thin, 200 mm, with extremely low stiffness, and must not be weakened. The wall is very long in the length direction, for example, 4-5 meters, and the stiffness in this direction is very large, so the vertical groove has little effect.
Close the water valve immediately.
Completely remove the damaged water pipe on the wall. >>>More
If the country does not have a bathroom concealment standard, the industry should also have!