How to maintain solid wood furniture to last for a long time?

The maintenance of solid wood furniture is very particular, if the use of protection is reasonable, in principle, it can be passed down for many years of long-term use, and the maintenance methods are:

1. Now there are two kinds of solid wood furniture, and the traditional hardwood furniture generally has no lacquer layer on the surface, just hot wax. Newly produced hardwood or other solid wood furniture is now protected by lacquer or varnish. There are differences in the maintenance methods of solid wood furniture with different treatments.

2. There is water in the solid wood, and the hardwood furniture will shrink when the air humidity is too low, and expand when it is too high. Generally, there is a lifting and shrinking layer when solid wood furniture is produced, but it should be noted that it should not be placed in a place that is too humid or too dry, such as near a high temperature and high heat place such as stove heating, or too humid basement and other places, so as not to produce mildew or dry cracking.

3. If it is a low-lying house in a bungalow, the furniture legs must be properly raised if the ground is wet, otherwise the legs are easy to be corroded by moisture.

4. When handling or moving furniture, it should be handled with care, and should not be pulled hard, so as not to damage the mortise and tenon structure. Tables and chairs can not be lifted, easy to fall off, should be lifted from both sides of the table and the chair surface, the cabinet is best to remove the cabinet door and then lift, can reduce the weight, but also avoid the cabinet door activity. If you need to move particularly heavy furniture, you can use a soft rope to put it under the furniture chassis and lift it again.

5. Avoid placing too heavy items on the surface of the furniture for a long time, especially TV, fish tank, etc., which will deform the furniture. The table should not be covered with non-breathable materials such as plastic sheeting.

6. If the floor in the room is uneven, it will cause the furniture to deform for a long time, and the way to avoid it is to use a small piece of wood to flatten it.

7. Never wipe the furniture with a wet rag or a rough rag, especially the hardwood furniture, especially the old furniture. Use a clean and soft cotton cloth, add a little furniture wax or walnut oil after a while, and gently rub it back and forth along the wood grain.

8. The surface of the furniture should avoid friction with hard objects, so as not to damage the surface texture of the paint and wood, such as placing porcelain and bronze and other decorative items to be particularly careful, it is best to pad a soft cloth.

9. Avoid placing the furniture in front of the large glass window facing south, as long-term direct sunlight will make the furniture too dry and fade.

10. Hot water cups cannot be placed directly on the surface of furniture, which will leave traces that are not easy to remove. Colored liquids, such as ink, should be absolutely avoided from spilling on the table.

If you can pay attention to the above, I believe that your furniture can be well protected and can prolong the service life of your furniture.

The maintenance of solid wood furniture is very important. Try not to put solid wood furniture in direct sunlight, it is easy to fade or even fall off if it is placed for too long, and at the same time keep away from air conditioners and heaters. A few pots of flowers or fish tanks should be placed in an air-conditioned room to maintain indoor humidity and prevent moisture from being absorbed from the furniture.

Items placed on the furniture should be padded with a layer of soft film, and handled gently in the vertical direction to avoid damaging the surface of the furniture. Rubber pads should be placed on the feet of furniture to avoid damage when moving back and forth; Do not drag or drag when moving, to avoid damage caused by uneven force on the furniture.

It should be scrubbed frequently and away from direct sunlight.