How to renovate the old bathroom tiles

Updated on Bathroom 2024-04-01
2 answers
  1. Anonymous users2024-01-23

    You can use water-based floor paint, floor paint construction steps: first clean the ground (dust, oil, loose), and then brush 1-2 times of primer, each time between more than 3 hours, (humidity can not be greater than 80 degrees, humidity greater than 80 degrees need to be separated by 6 hours or more than a day to construct the next time) more than 4 hours after drying, brush water-based paint 2-3 times, each time between more than 3 hours, more than 4 hours after drying brush topcoat 2-3 times, each time between more than 3 hours, 7 days to achieve the best.

    Note: Brushing tiles needs to be tested in a hidden place first, because some tiles have a layer of wax on the surface.

  2. Anonymous users2024-01-22

    For the renovation of the bathroom tiles, it is recommended to knock off the original tiles and reinstall them.

    At the same time, pay attention to whether the waterproof is damaged.

Related questions
6 answers2024-04-01

1. Remove old bricks.

If the original floor tiles have been partially damaged, more hollow or falling off, the surface enamel has been worn, or seriously dirty, it must be removed and replaced, and the effect of simple repair is generally not good. It is difficult to replace only a few floor tiles, because it is almost impossible to match the same color, model and style of floor tiles over the years. >>>More

13 answers2024-04-01

1. Shovel off the original floor tiles. The long-term wear and tear of the floor tiles on the ground can be intact is a few, most of the enamel on the surface of the floor tiles has been seriously worn and dirty, and it is no longer possible to replace them. However, some of the floor tiles of the color can no longer find the same model and style, so once you want to change, you can only shovel all the original floor tiles and re-lay the tiles. >>>More

4 answers2024-04-01

If the original tiles are still intact, it is not necessary to remove the old tiles, and it is also possible to apply them directly to the tiles. However, when paving directly on the old tiles, we should pay attention to two points, one is the firmness of the tile paste, and the other is the space occupation. >>>More

2 answers2024-04-01

Smash it, it's much better to go up and down the water again.

6 answers2024-04-01

Brush varnish to renovate old furniture needs to prepare grinding wheels, wood texture paint, mothproof, non-woven fabrics, the operation method is as follows: >>>More