-
Anonymous users2024-01-23If it is just peeling off and there is no dampness problem on the wall, you can retreat the wall and do anti-crack treatment.
If the wall is damp and peeling, it may be in one of the following two situations:
1) If there is a problem with the lower wall, it is caused by leakage in your own bathroom, check whether it is a leakage of buried water pipes through waterway pressure, if the pressure is normal, it is a problem with bathroom waterproofing, remove the tiles in the corresponding area of the bathroom, redo waterproofing, and then deal with the putty problem in the room;
2) If the upper wall is damp and peeling, this notice is caused by leakage in the upstairs and bathroom.
-
Anonymous users2024-01-22If this phenomenon occurs, it may be that you have not done waterproofing, or have not done a good job, it is recommended that you remove the damaged wall, redo it again with colorless waterproof material for a second time, and then re-batch putty to brush latex paint, remember, use colorless waterproof material, which is conducive to the work of batch putty. I guess it's not a big problem! If you have more questions, you can click on ID to consult.
-
Anonymous users2024-01-21If the wall is not treated well, the base layer of the wall may not be dry, the new wall is not coated with an anti-alkali sealing primer, the old wall is not coated with an interface agent, and the strength and adhesion of the putty are not enough. The level of the renovation manager is limited. The usual treatment method is to check whether the wall has a seepage water source, remove the original base layer, use stucco gypsum to treat the base layer, then batch putty, polish in place, and then latex paint finish.
-
Anonymous users2024-01-20It should be that the bathroom waterproofing is not done, so you can only wait for the wall to dry and make the waterproofing high or scrape the paint again. But it didn't work well.
1.Make sure the ground is leveled when laying bricks.
When paving, after knocking it flat, the cement slurry is coated with the floor tiles and spread on the ground, and the diagonal position of the four bricks is flush. And the order of laying is also exquisite. If the ground has a slope or floor drain, pay attention to find the slope according to the drainage direction; The wall tiles should be paved from the bottom up, and for the sake of aesthetics, the bottom bricks should be pasted later. >>>More
Summary. What should I do if a brush falls off in the toilet in a squatting pit? >>>More
It is caused by the drying and shrinkage of the heating wall, if the tile has been pure, directly now they say clearly, the reason is not man-made, you are not responsible, if not, use glue to stick up with something to prop up and wait for the glue to dry OK, no matter how you are afraid of things it is better to tell others as soon as possible, you don't have to be responsible.
The river flows eastward, and if you want to go to the toilet, follow me, and you don't bring a tissue paper, and you roar, and you can pick it with your hands, hey,
You ask the next guy what paper to use, ask him to show it to you, and, hey, you know.