What to do if there is a leak under the toilet

In this case, the interface is generally not connected properly and causes water leakage, but it can only be removed to check the cause of water leakage, and then repaired!

Most of them are not well drained or not in place, and they are disassembled and inspected and re-applied with glass glue.

In sanitary ware, the toilet is an indispensable product in our home life, which can solve a big problem in our life. However, in the process of use, it is inevitable that due to the quality of the toilet itself or some external factors, it will have various failures, such as water leakage at the bottom of the toilet. So what if you are lucky, what should you do if there is a leak under the toilet?

How to maintain the toilet? Let's find out together.

If there is a leak under the toilet, the first thing to see is what is causing it. It is generally caused by the aging of the parts inside the toilet tank, and in this case, only the aging parts need to be replaced. However, if there is a leak in the toilet and sewer pipe, it is necessary to reinstall the toilet and re-seal.

How to maintain the toilet.

1. Flush the toilet bowl with a lid.

One of the most overlooked aspects of a toilet bowl during daily use or cleaning is not closing the lid when flushing. It is important to know that if the toilet lid is open when flushing, the instant cyclone in the toilet bowl will carry germs into the air, and then suspend in the air and fall on the walls and objects in the toilet, which is easy to be contaminated by bacteria. Therefore, in daily use of the toilet, be sure to develop the habit of closing the toilet lid and flushing.

2. Do not throw into items that are easy to block.

Do not flush newspapers, diapers and other items that can easily cause clogging into the toilet during the use of the toilet, and if you accidentally fall into the debris that is easy to clog the toilet, you should take it out in time.

3. Toilet blockage treatment.

Clogged toilet is a relatively common situation in home life, which will not only affect our daily life, but also put people in an embarrassing situation, so it is best to learn some solutions to toilet blockage in ordinary times, which is still very helpful in life.

Article summary: The above is all about what to do if there is a leak under the toilet and how to maintain the toilet, I hope it will be helpful to you. If you want to know more about it, please stay tuned to Qeeka Home.

The first step is to dismantle the toilet. Remove all the glass glue from the junction between the bottom of the toilet bowl and the floor, and use a wallpaper knife to cut it. Then you can pull the glass glue off with your hands, so that you can remove the toilet from the ground; Then we can check the installation of the seal.

The second step is to reinstall the toilet. Check the sealing ring at the bottom of the toilet and install it in place, or replace it with a new good sealing ring, and then install the toilet on the ground drain pipe, and finally put glass glue on the part where the bottom of the toilet bowl and the floor tile meets, so as to complete the repair of the leakage at the bottom of the floor toilet.

Water leakage under the toilet is a tricky problem, because it can cause sewage to gush on the ground, affect the home environment and hygiene, and even cause problems such as water soaking on the walls and damage to the floor. If there is a leak under the toilet at home, you can take the following solutions:

1. Check the cause of water leakage.

The first step is to confirm the cause of the water leak. It could be clothes or dirt clogging the toilet, causing the water flow to reverse, or the water supply pipe clogged, affecting the discharge. It can also be due to a failed toilet seal, loose screws, or a cracked water pipe. After checking the cause of the water leak, develop a corresponding solution.

2. Replace the sealing gasket.

If the toilet gasket fails or deteriorates, it can cause water leakage problems. At this point, you need to remove the original gasket and remove the ink from the bottom and knot pad, and then reinstall the new gasket. The original gasket glue needs to be removed before installation, and several different types of gaskets can be prepared when purchasing a new gasket.

3. Check that the screws are loose.

If the toilet screws are loose, it may cause a water leak. At this time, it is necessary to disassemble the base of the barrel and tighten the screws to effectively solve the problem of water leakage.

4. Clean the toilet.

If there is too much dirt in the toilet, it can also lead to a leaky problem. At this point, we need to clean the toilet bowl to keep it open. You can use a descaling agent, but it is strong acidic and has a large odor, so you should do a good job of protection when using it, or use pure vinegar to soak it for a day, you can also achieve the effect of descaling.

In short, if there is a leak under the toilet in the home, we should solve it in time. The above methods can effectively solve the problem of water leakage in the family toilet, but in the process of operation, it is necessary to pay attention to safety and hygiene to avoid more serious problems caused by misoperation.

The first step is to dismantle the toilet. Remove all the glass glue on the junction between the bottom of the toilet and the ground, and cut it with a wallpaper knife to destroy the spring. Then you can pull the glass glue off with your hands, so that you can remove the toilet from the ground; Then we can check the installation of the seal.

The second step is to reinstall the toilet. Check the sealing ring at the bottom of the toilet and install it in place, or replace it with a new good sealing ring, and then install the toilet on the ground drain pipe, and finally put glass glue on the part where the bottom of the toilet bowl and the floor tile meets, so as to complete the repair of the leakage at the bottom of the floor toilet.

What is the substructure of the toilet?

The first part is the outlet pipe at the bottom of the toilet. The lower outlet pipe of the toilet bowl is a water outlet made of ceramic. We turn the toilet over and look at the bottom of the toilet, we will find that the bottom of the toilet has a bend that is close to S-shaped, and then there is a ceramic pipe that comes out of the bottom of the toilet, which is the water outlet pipe of the toilet.

The second part is the connection on the toilet outlet. Generally speaking, the toilet outlet pipe is covered with a rubber sealing ring, the role of the rubber sealing ring is very large, it is a key component to realize the connection between the porcelain outlet pipe and the PVC pipe at the bottom of the toilet. So the rubber ring must be installed correctly and in place.

How the toilet is installed.

The first step is to install the rubber ring of the toilet outlet pipe. When we open the toilet box, we will find the water outlet pipe at the bottom of the toilet bowl and the rubber ring it is equipped with. At this time, we put the bridge infiltration rubber ring on the outlet pipe at the lower part of the toilet, and then tightly connect the rubber ring with the PVC sewer pipe we reserved, so as to complete the preliminary installation of the toilet.

The second step is the fixing of the toilet. In the past, there were two ways to fix the toilet: the first was to hit the expansion bolt, and the second was to use the sealant.

At this stage, the installation of toilets in the family is mainly based on sealant, the practice is to fix the toilet bowl to the ground, at this time the toilet is basically very flat, and then the bottom of the toilet and the ground tile junction part of the glass glue or other special sealant, glue must be played tightly.

If the bottom of the toilet is buried in the middle of the cong and the problem of water seepage, you first need to close the water inlet valve, and then completely remove the glass glue that touches the bottom of the toilet and the ground. After water seepage, the glass glue may be affected, and the problem of yellowing and blackening may appear.

The glass glue is all removed, and then the toilet bowl is lifted up to a certain angle, check whether the flange ring connected to the sewage pipe mouth has been damaged or aged, and replace it with a new flange ring. Put it on the sewage outlet, and then put it vertically in the sewer pipe. Clean the area that comes into contact with the ground and reapply the glass glue.

The first step is to dismantle the toilet. Remove all the glass glue from the junction between the bottom of the toilet and the ground, and cut it with a wallpaper knife. Then you can pull the glass glue off with your hands, so that you can remove the toilet from the ground; Then we can check the installation of the seal.

The second step is to reinstall the toilet. Check the sealing liquid ring at the bottom of the toilet bowl and install it in place, or replace it with a new good sealing ring, and then install the toilet on the floor drain pipe, and finally put glass glue on the part where the bottom of the toilet bowl and the floor tile meets, so as to complete the repair of the leakage at the bottom of the floor toilet.