Why does a newly installed toilet not drain?

See if there is a P bend downstairs, if there is a P bend downstairs, and the contact lenses come with a P bend, then the water will be very slow, as long as the P bend downstairs is changed to an elbow or two 45-degree elbows, it has nothing to do with the upstairs.

Toilet installation errors: generally divided into: the outlet at the bottom is not aligned with the drain, the screw hole at the bottom of the toilet is completely sealed, which will cause the toilet drain to be unblocked, and the water level of the toilet tank is not high enough to affect the flushing effect.

1. Slight blockage of the toilet: Generally, the toilet blockage is caused by toilet paper or sanitary napkins, towel rags, etc., which can be dredged directly by using a pipe dredging machine or simple dredging tools.

2. Toilet hard object blockage: accidentally fall into plastic brushes, bottle caps, soap, combs and other hard objects when using. This kind of blockage is mild, you can directly use a pipe dredging machine or a simple dredging device to dredge directly, and when it is serious, you must disassemble the toilet to dredge, and this situation can only be completely solved by getting things out.

3. Aging and blockage of the toilet: The toilet has been used for a long time, it is inevitable that it will scale on the inner wall, and in serious cases, it will block the vent of the toilet and cause the toilet to drain slowly.

Why is it uneven, if it is not aligned, how to install the flange of the interface, first see what causes the interface to be misaligned, is the distance from the hole to the wall is not enough or the hole of the toilet is wrong? If it's not in the right place, you can buy a shifter and install it, and it should solve the problem.

The newly replaced sewer pipe, with an elbow, can be determined to be unobstructed. The newly bought toilet is not easy to use, the water is too slow, sometimes it is not pumped, and the Shenghao brand is not equipped with a flange. I have installed it many times, and I can't solve it by installing it myself or finding someone to install it.

But after removing it, it is very easy to use the toilet bowl and align the drain with the sewer, and the sewer is also unobstructed, and there is no blockage. However, once the toilet is glued with glass glue, this problem will occur, and the flush valve will be pressed more After the water level rises to the old high, there will be a vortex slowly flushing down, and the flushing force is not large.

It may be that the toilet mouth is not even, and the toilet can not have some obstructions.

Plumbing problems, you call that person to do it.

Analysis of various causes of poor toilet drainage:

1. Poor toilet drainage - slight blockage of the toilet: generally the toilet blockage caused by toilet paper or sanitary napkins, towel rags, etc., can be dredged directly by using a pipe dredging machine or simple dredging tools.

2. Poor toilet drainage - toilet hard object blockage: accidentally fall into plastic brushes, bottle caps, soap, combs and other hard objects when using. This kind of blockage is mild, you can directly use a pipe dredging machine or a simple dredging device to dredge directly, and when it is serious, you must disassemble the toilet to dredge, and this situation can only be completely solved by getting things out.

3. Poor toilet drainage - toilet aging and blockage: the toilet has been used for a long time, it is inevitable that it will scale on the inner wall, and in serious cases, it will block the air outlet of the toilet and cause the toilet to drain slowly.

4. Poor toilet drainage - toilet installation errors: generally divided into: the outlet at the bottom is not aligned with the drain outlet, the screw hole at the bottom of the toilet is completely sealed, which will cause the toilet drain to be unsmooth, and the water level of the toilet tank is not high enough to affect the flushing effect.

5. Poor toilet drainage - squatting pit to toilet: some old houses are installed when building a squatting pit, and the bottom of the sewer pipe is a U-shaped waterproof elbow, and when the toilet is recreated, it is best to replace the bottom elbow with a direct bend, if it can't be replaced, then before installing the toilet, it is necessary to do a good job of cleaning up the bottom anti-water bend, and the installation is to avoid letting cement or tile fragments fall in. This kind of squatting toilet should be used with more care.