-
Anonymous users2024-01-23Connect the tee directly from the riser and install a concealed water tank and a wall-hung toilet, because the wall-hung toilet is the back row and the sewage outlet is relatively high, so the drop is enough. Secondly, it is necessary to increase the drainage outlet, and whether the bathroom can be improved. Finally, the ground water can be discharged into the squatting toilet or into the water-sealed floor drain.
-
Anonymous users2024-01-22It would be nice to fix it.
Lifters can be installed, according to the requirements, such as the temperature, flow, head, etc. of the required drainage, the household ones are Denmark, Italy, Germany, and there are also Shanghai Green Rings, according to the use and economic strength of the purchase price, about 10,000 yuan in Germany, five to six thousand in Italy, four thousand in Denmark, two to three thousand in Shanghai, I just bought two Italian ones.
You don't need any special tools, you can use a long hair roller, and the original wall surface can be cleaned as long as the base layer is clean.
Clean the area around the reserved drain nozzle, remove the temporary pipe plug, and check whether there is any debris in the pipe. Find the centerline of the drain mouth and draw it on the wall. Use a level (or sinker) to find a good vertical line. >>>More
If you want to save trouble, you can just put the drainage hose in the squatting urinal, there is no other way. >>>More
The bottom of the riser pvc110 tee is 30-35 cm away from the top plate surface, the expansion joint is installed below the tee, the floor drain and shower are all using the S bend with a cap, the basin is installed with a 90-degree cap elbow, and the S bend can be deodorized when installing the basin on this floor, and the kitchen sink drainage branch is installed on this floor, and the P bend with a cap is directly installed, I hope it can help you. It should also be noted that the smaller the distance between the tee and the top, the greater the net height of the bathroom.