How to change the sink for washing hands in the bathroom

1.Turn off the water pipe switch.

2.Tear down the old pool.

3.When placing a new pool, pay attention to the levelness!

4.Plug in the water pipes! Try to see if it doesn't leak?

5.Wipe down the area around the pool! Seal and fix with glass glue!

6.Wait for the glass glue to dry, about a day, if you want to use it early, be careful not to let it move!

I don't know what kind of pool you are, fixed to the wall, first close the water valve, remove the faucet and sewer pipe, and then remove the expansion screw, you can take it down and replace it. If it is embedded in the sink, remove the faucet and drain pipe, and then use a utility knife to remove the sealant.

No, it's better not to get it yourself, you go to buy the place where he can package the installation. In fact, it is very simple to be able to do it, and it is not clear in three words or two words.

Usually the pool will be glued with cement! So if you want to change, it may take a lot of effort!

If it is made of glass glue, it is much more convenient! As long as you use a blade to cut the glass glue, you should pay attention to safety when working! Don't let children in, it's easy to have problems!

1.Turn off the water pipe switch.

2.Tear down the old pool.

3.When placing a new pool, pay attention to the levelness!

4.Plug in the water pipes! Try to see if it doesn't leak?

5.Wipe down the area around the pool! Seal and fix with glass glue!

6.Wait for the glass glue to dry, about a day, if you want to use it early, be careful not to let it move!

It's hard to say, it depends on what kind of pool you use, and the main reason for changing the pool is that the size of the pool should be right, so it doesn't take trouble.